topic Re: Pfs in Pix 6.3 in Network Security https://community.cisco.com/t5/network-security/pfs-in-pix-6-3/m-p/1180488#M877150 <HTML><HEAD></HEAD><BODY><P>On the pix you can ename pfs in your l2l tunnels as:</P><P></P><P>example</P><P></P><P>crypto map <MAP_NAME> <TUNNEL> set pfs group2</TUNNEL></MAP_NAME></P><P></P><P>or if using DH group 1 which is default when not specifying keyword <B>group</B> syntax would be:</P><P></P><P>crypto map <MAP_NAME> <TUNNEL> set pfs </TUNNEL></MAP_NAME></P><P></P><P>hope this answers your question</P><P></P><P>Regards</P></BODY></HTML> Tue, 27 Jan 2009 20:19:42 GMT JORGE RODRIGUEZ 2009-01-27T20:19:42Z Pfs in Pix 6.3 https://community.cisco.com/t5/network-security/pfs-in-pix-6-3/m-p/1180487#M877147 <P>Hi,</P><P></P><P>Iam using the PIX firewall 6.3 and my remote peer is cisco router 2801(12.4)</P><P></P><P>now we are trying to enable PFS for our VPN connection how to enable pfs in PIX firewall </P><P></P><P>since we are crypto map statement (crypto map testing 19 set )</P><P>or we need to create dynamic map entry</P><P></P><P>Please suggest</P><P></P><P>Regards,</P><P>Vinu</P><P></P><P></P> Mon, 11 Mar 2019 14:42:37 GMT https://community.cisco.com/t5/network-security/pfs-in-pix-6-3/m-p/1180487#M877147 vinoth.kumar 2019-03-11T14:42:37Z Re: Pfs in Pix 6.3 https://community.cisco.com/t5/network-security/pfs-in-pix-6-3/m-p/1180488#M877150 <HTML><HEAD></HEAD><BODY><P>On the pix you can ename pfs in your l2l tunnels as:</P><P></P><P>example</P><P></P><P>crypto map <MAP_NAME> <TUNNEL> set pfs group2</TUNNEL></MAP_NAME></P><P></P><P>or if using DH group 1 which is default when not specifying keyword <B>group</B> syntax would be:</P><P></P><P>crypto map <MAP_NAME> <TUNNEL> set pfs </TUNNEL></MAP_NAME></P><P></P><P>hope this answers your question</P><P></P><P>Regards</P></BODY></HTML> Tue, 27 Jan 2009 20:19:42 GMT https://community.cisco.com/t5/network-security/pfs-in-pix-6-3/m-p/1180488#M877150 JORGE RODRIGUEZ 2009-01-27T20:19:42Z