topic Power enable SSM module in Network Security https://community.cisco.com/t5/network-security/power-enable-ssm-module/m-p/1175278#M877178 <P></P><P>I have shutdown the ASA SSM module with </P><P></P><P>hw-module module 1 shutdown</P><P></P><P>How can I power it on again.</P> Mon, 11 Mar 2019 14:42:18 GMT cisco_lite 2019-03-11T14:42:18Z Power enable SSM module https://community.cisco.com/t5/network-security/power-enable-ssm-module/m-p/1175278#M877178 <P></P><P>I have shutdown the ASA SSM module with </P><P></P><P>hw-module module 1 shutdown</P><P></P><P>How can I power it on again.</P> Mon, 11 Mar 2019 14:42:18 GMT https://community.cisco.com/t5/network-security/power-enable-ssm-module/m-p/1175278#M877178 cisco_lite 2019-03-11T14:42:18Z Re: Power enable SSM module https://community.cisco.com/t5/network-security/power-enable-ssm-module/m-p/1175279#M877179 <HTML><HEAD></HEAD><BODY><P>"hw-module module 1 reset" should do it - </P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa72/command/reference/gh_72.html#wp1685023" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa72/command/reference/gh_72.html#wp1685023</A></P><P></P><P>Jon</P></BODY></HTML> Mon, 26 Jan 2009 22:30:44 GMT https://community.cisco.com/t5/network-security/power-enable-ssm-module/m-p/1175279#M877179 Jon Marshall 2009-01-26T22:30:44Z Re: Power enable SSM module https://community.cisco.com/t5/network-security/power-enable-ssm-module/m-p/1175280#M877180 <HTML><HEAD></HEAD><BODY><P></P><P>But this would perform a hardware reset. I am not sure what all is included in the hardware reset, probably configuration or license loss.</P><P></P><P>I just need a reboot/power on command.</P></BODY></HTML> Mon, 26 Jan 2009 23:21:03 GMT https://community.cisco.com/t5/network-security/power-enable-ssm-module/m-p/1175280#M877180 cisco_lite 2009-01-26T23:21:03Z Re: Power enable SSM module https://community.cisco.com/t5/network-security/power-enable-ssm-module/m-p/1175281#M877181 <HTML><HEAD></HEAD><BODY><P>Hardware reset means the ASA SSM module will actually reboot itself rather than just reload the software. </P><P></P><P>You can't use "hw-module module 1 reload" because the SSM module needs to be up for this command to take effect. As you have shut the module down it won't respond to the reload option. </P><P></P><P>A reset does not set the config back to default or anything. What a reset does is simply a shutdown followed by a restart.</P><P></P><P>Jon</P></BODY></HTML> Mon, 26 Jan 2009 23:26:50 GMT https://community.cisco.com/t5/network-security/power-enable-ssm-module/m-p/1175281#M877181 Jon Marshall 2009-01-26T23:26:50Z