IDS MODULE IN 3800

netsec123 — Sun, 10 Mar 2019 10:25:27 GMT

Hi. We are trying to BLOCK port scans coming from INSIDE our LAN. We are confused on how to configure this on the 3800 that houses the IDS module. PLEASE HELP.

Re: IDS MODULE IN 3800

edwakim — Thu, 18 Jan 2007 15:25:55 GMT

Hi,

First NM-CIDS module needs to know the port scan. You can configure the NM-CIDS module setting in your router. Please follow the guide below.

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008055df95.html#wp1032121

Then you can configuring blocking. Your NM-CIDS's ethernet interface will either telne t or ssh to your router to put blocking.

You can find more about blocking here.

CLI 5.1

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008055df77.html

IDM 5.1

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00804d1374.html

Thank you.

Edward

topic IDS MODULE IN 3800 in Network Security

IDS MODULE IN 3800

Re: IDS MODULE IN 3800