topic Re: Not a valid ANyconnect image? in Network Security https://community.cisco.com/t5/network-security/not-a-valid-anyconnect-image/m-p/1124258#M878185 <HTML><HEAD></HEAD><BODY><P>Make sure the version of anyconnect is supported with ASA OS that you are running. According the release notes of anyconnect 2.3 requires 8.0(3).1 or later software on the ASA.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect23/release/notes/anyconnect23rn.pdf" target="_blank">http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect23/release/notes/anyconnect23rn.pdf</A></P><P></P><P>HTH,</P><P>Mark</P></BODY></HTML> Fri, 02 Jan 2009 21:26:47 GMT Mark Yeates 2009-01-02T21:26:47Z Not a valid ANyconnect image? https://community.cisco.com/t5/network-security/not-a-valid-anyconnect-image/m-p/1124257#M878180 <P>Does anyone know what that means? I was trying to enable Anyconnect on my ASA 5520</P> Mon, 11 Mar 2019 14:31:50 GMT https://community.cisco.com/t5/network-security/not-a-valid-anyconnect-image/m-p/1124257#M878180 accesshollywood2 2019-03-11T14:31:50Z Re: Not a valid ANyconnect image? https://community.cisco.com/t5/network-security/not-a-valid-anyconnect-image/m-p/1124258#M878185 <HTML><HEAD></HEAD><BODY><P>Make sure the version of anyconnect is supported with ASA OS that you are running. According the release notes of anyconnect 2.3 requires 8.0(3).1 or later software on the ASA.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect23/release/notes/anyconnect23rn.pdf" target="_blank">http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect23/release/notes/anyconnect23rn.pdf</A></P><P></P><P>HTH,</P><P>Mark</P></BODY></HTML> Fri, 02 Jan 2009 21:26:47 GMT https://community.cisco.com/t5/network-security/not-a-valid-anyconnect-image/m-p/1124258#M878185 Mark Yeates 2009-01-02T21:26:47Z