topic Juniper netscreen to ASA conversion in Network Security

Juniper netscreen to ASA conversion

punit.dixit — Mon, 11 Mar 2019 14:28:19 GMT

Hi,

does someone has any case study where juniper netscreen has been replaced with cisco ASA?

rgds

Re: Juniper netscreen to ASA conversion

secureIT — Mon, 22 Dec 2008 09:19:56 GMT

yes punit,

i have done it..

I dont have any documentation for this..

Re: Juniper netscreen to ASA conversion

punit.dixit — Mon, 22 Dec 2008 09:25:30 GMT

hi,

can u just send me sample config of netscreen and converted config of ASA

rgds

Re: Juniper netscreen to ASA conversion

secureIT — Mon, 22 Dec 2008 09:37:24 GMT

I will send by tomorrow...

Re: Juniper netscreen to ASA conversion

punit.dixit — Mon, 22 Dec 2008 09:39:47 GMT

thanks rajesh

rgds

Re: Juniper netscreen to ASA conversion

secureIT — Wed, 31 Dec 2008 05:11:39 GMT

Hi,

I have the config now, I will send you the conf from my gmail today evening to wipro id.

I do not want the config to be published over internet as its confidential..

is that ok ?

-Rajesh

Re: Juniper netscreen to ASA conversion

punit.dixit — Wed, 31 Dec 2008 05:19:02 GMT

yeah, it would be perfectly ok for me.

Thanks & Regards

Re: Juniper netscreen to ASA conversion

secureIT — Wed, 31 Dec 2008 14:59:37 GMT

Hi Punit,

I have sent you the Juniper and ASA configurations to punit.dixit@wipro.com

Pls rate if helpfull...

regards

Rajesh

Re: Juniper netscreen to ASA conversion

jj27 — Tue, 06 Jan 2009 16:59:25 GMT

I would be interested in seeing the Juniper configuration as well. You can replace all critical information with fake info if you want.

Re: Juniper netscreen to ASA conversion

ankurs2008 — Tue, 06 Jan 2009 20:20:22 GMT

hi rajesh

please send me the info as well to ankur.sachdev@gmail.com

Re: Juniper netscreen to ASA conversion

fkleininger — Thu, 04 Mar 2010 23:51:33 GMT

hi Raj,

could you sned here also fkleininger@comcast.net

im about to go thru this

thx F

Re: Juniper netscreen to ASA conversion

ayman.abdalla — Wed, 14 Apr 2010 09:10:07 GMT

Hi Guys. I would be very pleased if anyone of you could send me a file/files containing Juniper netscreen configuration converted to Cisco ASA firewall.

Re: Juniper netscreen to ASA conversion

secureIT — Thu, 15 Apr 2010 07:25:13 GMT

Hi,

Pls post the sample configuration of your juniper..i shall convert into to pix/asa compatible and give it you....

It requires time to understand the topopolgy....

-Rajesh P

Re: Juniper netscreen to ASA conversion

ayman.abdalla — Thu, 15 Apr 2010 08:04:46 GMT

Thank you Rajesh.

I will send the configuration file to your email for the time being and once it is converted thanks to you i will remove the sensitive information from it and post it here so that every one can get the benefit out of this conversion.

The migration will replace Juniper Netscreen 5200 by ASA 5580.

Thank you.

Re: Juniper netscreen to ASA conversion

secureIT — Fri, 16 Apr 2010 09:28:59 GMT

its fine ayman....

let me have a look into it & check in the weekend....

regards

Rajesh P

Re: Juniper netscreen to ASA conversion

ayman.abdalla — Fri, 16 Apr 2010 14:22:41 GMT

Thanks Rajesh,

the email was sent from my personal account, "aymanov1@hotmail.com"

have a nice weekend

Re: Juniper netscreen to ASA conversion

secureIT — Mon, 19 Apr 2010 11:17:37 GMT

Hi Ayman,

Your configuration is so huge & i dont have enough time to go thru it.... I had taken almost 3 days to study and prepare the ASA CLI configuration for my earlier project. So i shall upload the JUNIPER & CISCO ASA converted configuration of my ealier project.

All the Ip addresses and networks have been replaced with fake ip address in both the text files for security perspective.

All of you members can go thru each of the configurations and match it. Those who are not familiar with juniper cli, should take a backup of policy screen shots and prepare for ASA.

There are slight changes in both the configurations i prepared, since customer wanted to remove unwanted configurations from it & fine tune it.

For any troubelshooting / requirements you may update the case notes, i shall reply once i get time.

Hope all of you will enjoy it...

regards

Rajesh P ... (CCSP)

Re: Juniper netscreen to ASA conversion

ayman.abdalla — Tue, 20 Apr 2010 14:22:12 GMT

Thank you very much Rajesh for this valuable information.

I really appreciate your efforts to come up with these two documents. It will save me a lot of long working hours on Juniper manulas

i will start working on it and if i find any obstacles, i will let you know.

Re: Juniper netscreen to ASA conversion

racquel.mays — Thu, 19 Aug 2010 22:26:02 GMT

Thank you soooo much you have really given me a good basis for my juniper to asa migration! Thank you again for providing the files.

Re: Juniper netscreen to ASA conversion

secureIT — Fri, 20 Aug 2010 02:42:07 GMT

You all are welcome...

Guy pls rate if this thread helped you...im sure all of you would have enjoyed it.