topic Re: IDSM-2 Not responding in Network Security https://community.cisco.com/t5/network-security/idsm-2-not-responding/m-p/705206#M88068 <HTML><HEAD></HEAD><BODY><P>Which OS ver are you using 4.x or 5.x. I had the same problems with some 4.x sensors. To get them working again (for a short time), had to issue a "hw reset from the switch).</P><P>One ended up going DOA. I've since been using the new 5.x code, and it seems a lot more stable</P></BODY></HTML> Thu, 14 Dec 2006 16:15:25 GMT davidculp 2006-12-14T16:15:25Z IDSM-2 Not responding https://community.cisco.com/t5/network-security/idsm-2-not-responding/m-p/705205#M88066 <P>I set up two IPS's in a CAT6509 and using Cisco's IPS Event Viewer got into them fine and had traffic and everything, but after about a week i cant connect to them with event viewer i cant get into them by double clicking, but i have the red X and the status is "Status unknown. IEV server program may not be running." Any ideas? This has happened twice now, the way i fixed it last time was reloading the sensors. I know i must be missing something. Any help would be great thanks.</P> Sun, 10 Mar 2019 10:22:24 GMT https://community.cisco.com/t5/network-security/idsm-2-not-responding/m-p/705205#M88066 anthonysgroi 2019-03-10T10:22:24Z Re: IDSM-2 Not responding https://community.cisco.com/t5/network-security/idsm-2-not-responding/m-p/705206#M88068 <HTML><HEAD></HEAD><BODY><P>Which OS ver are you using 4.x or 5.x. I had the same problems with some 4.x sensors. To get them working again (for a short time), had to issue a "hw reset from the switch).</P><P>One ended up going DOA. I've since been using the new 5.x code, and it seems a lot more stable</P></BODY></HTML> Thu, 14 Dec 2006 16:15:25 GMT https://community.cisco.com/t5/network-security/idsm-2-not-responding/m-p/705206#M88068 davidculp 2006-12-14T16:15:25Z Re: IDSM-2 Not responding https://community.cisco.com/t5/network-security/idsm-2-not-responding/m-p/705207#M88070 <HTML><HEAD></HEAD><BODY><P>im using 5.x its really weird because i can still get into it by double clicking but all functionality in event viewer is gone.</P></BODY></HTML> Thu, 14 Dec 2006 17:12:25 GMT https://community.cisco.com/t5/network-security/idsm-2-not-responding/m-p/705207#M88070 anthonysgroi 2006-12-14T17:12:25Z