topic SPAN IN SWITCH in Network Security https://community.cisco.com/t5/network-security/span-in-switch/m-p/659320#M88147 <P>Hi</P><P></P><P>I have 4215 IDS sensor and 3550 switch.</P><P>I want connect sensing interface to switch. I have pc where event viwer install.</P><P></P><P>now in switch has f0/1 and f0/2 port</P><P>f0/1 is source port and f0/2 is destination port.</P><P></P><P>so my question is in which port i connect IDS sensing interface for mirroing data to my pc ??/</P><P></P><P>thanks</P><P>biplob</P><P></P> Sun, 10 Mar 2019 10:21:24 GMT iqbalkhan 2019-03-10T10:21:24Z SPAN IN SWITCH https://community.cisco.com/t5/network-security/span-in-switch/m-p/659320#M88147 <P>Hi</P><P></P><P>I have 4215 IDS sensor and 3550 switch.</P><P>I want connect sensing interface to switch. I have pc where event viwer install.</P><P></P><P>now in switch has f0/1 and f0/2 port</P><P>f0/1 is source port and f0/2 is destination port.</P><P></P><P>so my question is in which port i connect IDS sensing interface for mirroing data to my pc ??/</P><P></P><P>thanks</P><P>biplob</P><P></P> Sun, 10 Mar 2019 10:21:24 GMT https://community.cisco.com/t5/network-security/span-in-switch/m-p/659320#M88147 iqbalkhan 2019-03-10T10:21:24Z Re: SPAN IN SWITCH https://community.cisco.com/t5/network-security/span-in-switch/m-p/659321#M88148 <HTML><HEAD></HEAD><BODY><P>Connect it to Fa0/2 - SPAN destination.</P><P></P><P>The Fa0/1 is the port you want to monitor the traversing traffic (tx/rx). All traffic snapshot will be sent to Fa0/2 as destination port where the IDS monitoring port (in promiscuous@passive mode) is connected to and receiving the packet snapshot for analysis.</P><P></P><P>HTH</P><P>AK</P></BODY></HTML> Wed, 06 Dec 2006 12:44:08 GMT https://community.cisco.com/t5/network-security/span-in-switch/m-p/659321#M88148 a.kiprawih 2006-12-06T12:44:08Z