topic Re: Cisco Pix 6.3 VPN Question in Network Security https://community.cisco.com/t5/network-security/cisco-pix-6-3-vpn-question/m-p/1124655#M892476 <HTML><HEAD></HEAD><BODY><P>As I stated in my original post.. I was under the impression that show vpdn tunnel summary was the command to list the tunnels and their respective users.. However after trying that command it returns literally nothing to the output window. My goal is to gather a list of the VPDN users on the Cisco Pix firewall so that I can see who is logged/authenticated into the remote VPN sessions.</P></BODY></HTML> Wed, 10 Dec 2008 21:53:31 GMT toddbelcher 2008-12-10T21:53:31Z Cisco Pix 6.3 VPN Question https://community.cisco.com/t5/network-security/cisco-pix-6-3-vpn-question/m-p/1124653#M892473 <P>It has been years since I remember doing this, but I recall being able to do a show vpdn tunnel summary to be able to list the currently logged-in RAS VPN Tunnel users. However it does not seem to be working on a Pix 515 that I have been trying it on. I may be using the incorrect command/syntax and would help with a nudge in the right direction.</P> Mon, 11 Mar 2019 14:24:21 GMT https://community.cisco.com/t5/network-security/cisco-pix-6-3-vpn-question/m-p/1124653#M892473 toddbelcher 2019-03-11T14:24:21Z Re: Cisco Pix 6.3 VPN Question https://community.cisco.com/t5/network-security/cisco-pix-6-3-vpn-question/m-p/1124654#M892474 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Below are some show vpdn commands in Pix 6.3</P><P></P><P>show vpdn tunnel [l2tp|pptp|pppoe] [id <TNL_ID>|packets|state|summary|transport]</TNL_ID></P><P>show vpdn session [l2tp|pptp|pppoe] [id <SESS_ID>|packets|state|window]</SESS_ID></P><P>show vpdn pppinterface [id <DEV_ID>]</DEV_ID></P><P>show vpdn group [<GROUP_NAME>]</GROUP_NAME></P><P>show vpdn username [user_name] </P><P></P><P>Regards,</P><P>Arul</P><P></P><P>*Pls rate if it helps*</P></BODY></HTML> Wed, 10 Dec 2008 21:45:33 GMT https://community.cisco.com/t5/network-security/cisco-pix-6-3-vpn-question/m-p/1124654#M892474 ajagadee 2008-12-10T21:45:33Z Re: Cisco Pix 6.3 VPN Question https://community.cisco.com/t5/network-security/cisco-pix-6-3-vpn-question/m-p/1124655#M892476 <HTML><HEAD></HEAD><BODY><P>As I stated in my original post.. I was under the impression that show vpdn tunnel summary was the command to list the tunnels and their respective users.. However after trying that command it returns literally nothing to the output window. My goal is to gather a list of the VPDN users on the Cisco Pix firewall so that I can see who is logged/authenticated into the remote VPN sessions.</P></BODY></HTML> Wed, 10 Dec 2008 21:53:31 GMT https://community.cisco.com/t5/network-security/cisco-pix-6-3-vpn-question/m-p/1124655#M892476 toddbelcher 2008-12-10T21:53:31Z