topic Re: Cisco Content Switch in Network Security https://community.cisco.com/t5/network-security/cisco-content-switch/m-p/1119703#M893219 <HTML><HEAD></HEAD><BODY><P>If you're load balancing services through a DMZ (ie public users), then in the DMZ. If you're load balancing services to internal users only, then inside will work. Just as an FYI, the ACE will be replacing the CSS soon, so you might want to take a look at them instead.</P><P></P><P>Hope that helps.</P></BODY></HTML> Fri, 21 Nov 2008 21:49:00 GMT Collin Clark 2008-11-21T21:49:00Z Cisco Content Switch https://community.cisco.com/t5/network-security/cisco-content-switch/m-p/1119702#M893215 <P>We have a requirement to purchase the Cisco CSS content switch and take advantage of the "sticky" function.</P><P></P><P>Where would one put a CSS on the network, is it best to go on the DMZ or one of the internal vlans? </P> Mon, 11 Mar 2019 14:16:28 GMT https://community.cisco.com/t5/network-security/cisco-content-switch/m-p/1119702#M893215 ronshuster 2019-03-11T14:16:28Z Re: Cisco Content Switch https://community.cisco.com/t5/network-security/cisco-content-switch/m-p/1119703#M893219 <HTML><HEAD></HEAD><BODY><P>If you're load balancing services through a DMZ (ie public users), then in the DMZ. If you're load balancing services to internal users only, then inside will work. Just as an FYI, the ACE will be replacing the CSS soon, so you might want to take a look at them instead.</P><P></P><P>Hope that helps.</P></BODY></HTML> Fri, 21 Nov 2008 21:49:00 GMT https://community.cisco.com/t5/network-security/cisco-content-switch/m-p/1119703#M893219 Collin Clark 2008-11-21T21:49:00Z