topic Re: Getting %PIX-3-305006: regular translation creation failed f in Network Security https://community.cisco.com/t5/network-security/getting-pix-3-305006-regular-translation-creation-failed-for-tcp/m-p/1046480#M893697 <HTML><HEAD></HEAD><BODY><P>Hi ..</P><P></P><P>by looking at your config you probably need to add those hosts you are talking about to the access-list nonat. For instance if the inside host having the issue is x.x.x.x then your entry should look like this </P><P></P><P>access-list nonat permit ip host x.x.x.x host <DMZ server="" ip=""></DMZ></P><P></P><P>Please rate helpful posts !!</P><P></P></BODY></HTML> Wed, 12 Nov 2008 10:13:46 GMT Fernando_Meza 2008-11-12T10:13:46Z Getting %PIX-3-305006: regular translation creation failed for tcp src insi https://community.cisco.com/t5/network-security/getting-pix-3-305006-regular-translation-creation-failed-for-tcp/m-p/1046478#M893688 <P>I'm getting the error continously for a couple of my hosts on the inside trying to access hosts on a DMZ. For hosts starting connections on the inside to the DMZ, I'm using an access-list. I'm having trouble figuring out what is going on.</P> Mon, 11 Mar 2019 14:11:51 GMT https://community.cisco.com/t5/network-security/getting-pix-3-305006-regular-translation-creation-failed-for-tcp/m-p/1046478#M893688 sean-boston 2019-03-11T14:11:51Z Re: Getting %PIX-3-305006: regular translation creation failed f https://community.cisco.com/t5/network-security/getting-pix-3-305006-regular-translation-creation-failed-for-tcp/m-p/1046479#M893693 <HTML><HEAD></HEAD><BODY><P>Hello Sean,</P><P> Try this</P><P>static (externaldmz,inside) 192.168.151.0 192.168.151.0 netmask 255.255.255.0</P><P></P><P>Regards</P></BODY></HTML> Wed, 12 Nov 2008 09:24:03 GMT https://community.cisco.com/t5/network-security/getting-pix-3-305006-regular-translation-creation-failed-for-tcp/m-p/1046479#M893693 Alan Huseyin Kayahan 2008-11-12T09:24:03Z Re: Getting %PIX-3-305006: regular translation creation failed f https://community.cisco.com/t5/network-security/getting-pix-3-305006-regular-translation-creation-failed-for-tcp/m-p/1046480#M893697 <HTML><HEAD></HEAD><BODY><P>Hi ..</P><P></P><P>by looking at your config you probably need to add those hosts you are talking about to the access-list nonat. For instance if the inside host having the issue is x.x.x.x then your entry should look like this </P><P></P><P>access-list nonat permit ip host x.x.x.x host <DMZ server="" ip=""></DMZ></P><P></P><P>Please rate helpful posts !!</P><P></P></BODY></HTML> Wed, 12 Nov 2008 10:13:46 GMT https://community.cisco.com/t5/network-security/getting-pix-3-305006-regular-translation-creation-failed-for-tcp/m-p/1046480#M893697 Fernando_Meza 2008-11-12T10:13:46Z