topic Re: Pix 501 in Network Security https://community.cisco.com/t5/network-security/pix-501/m-p/1042091#M893727 <HTML><HEAD></HEAD><BODY><P>How to I get the running configs.Sorry never used pix before?</P><P></P><P>Many Thanks</P></BODY></HTML> Tue, 11 Nov 2008 12:39:00 GMT abdulqadera 2008-11-11T12:39:00Z Pix 501 https://community.cisco.com/t5/network-security/pix-501/m-p/1042089#M893725 <P>I am trying to configure the Pix 501 firewall on a small size network. The design of the network consists of the BT router that connects to the switch. I would like to connect the Pix in the middle between the BT router and the network. The router has been assigned with a static IP address on the outside. The problem is the router is not allowing any access to the Internet. </P><P></P><P>Can any one help?</P><P></P><P>AA</P><P></P> Mon, 11 Mar 2019 14:11:17 GMT https://community.cisco.com/t5/network-security/pix-501/m-p/1042089#M893725 abdulqadera 2019-03-11T14:11:17Z Re: Pix 501 https://community.cisco.com/t5/network-security/pix-501/m-p/1042090#M893726 <HTML><HEAD></HEAD><BODY><P>Hello Abduljaber,</P><P> Please post the running configs of both Pix and router</P><P></P><P>Regards</P></BODY></HTML> Tue, 11 Nov 2008 12:09:35 GMT https://community.cisco.com/t5/network-security/pix-501/m-p/1042090#M893726 Alan Huseyin Kayahan 2008-11-11T12:09:35Z Re: Pix 501 https://community.cisco.com/t5/network-security/pix-501/m-p/1042091#M893727 <HTML><HEAD></HEAD><BODY><P>How to I get the running configs.Sorry never used pix before?</P><P></P><P>Many Thanks</P></BODY></HTML> Tue, 11 Nov 2008 12:39:00 GMT https://community.cisco.com/t5/network-security/pix-501/m-p/1042091#M893727 abdulqadera 2008-11-11T12:39:00Z Re: Pix 501 https://community.cisco.com/t5/network-security/pix-501/m-p/1042092#M893728 <HTML><HEAD></HEAD><BODY><P>just type "sh run" </P><P></P><P>Ray</P></BODY></HTML> Tue, 11 Nov 2008 12:41:15 GMT https://community.cisco.com/t5/network-security/pix-501/m-p/1042092#M893728 ray_stone 2008-11-11T12:41:15Z