topic Re: Static Nat Issue in Network Security https://community.cisco.com/t5/network-security/static-nat-issue/m-p/1107741#M894044 <HTML><HEAD></HEAD><BODY><P>Hi Stephen -</P><P></P><P>Seems like the old Xlate entry is still in the translation table.</P><P></P><P>Are you clearing the translation table after implementing the Static Nat?</P><P></P><P>thxs</P><P>peter</P></BODY></HTML> Mon, 10 Nov 2008 14:24:28 GMT pcomeaux 2008-11-10T14:24:28Z Static Nat Issue https://community.cisco.com/t5/network-security/static-nat-issue/m-p/1107740#M894041 <P>Hi Guys,</P><P></P><P>I have a pretty stange issue. </P><P></P><P>I have several servers inside a pair of ASAs in active/stndby. </P><P>Wehn i add a static nat for one of the servers, the server can no longer access the internet. When i remove the rule, i can acces the net no problem. The only strange scenario here is the directly between the servers and the firewalls is a couple of CSS boxes. (i have no great experience with these). These are in a type of bridging mode form what i can tell and they use VIPs etc..</P><P></P><P>Can anyone best advise on how i can resolve this issue.</P><P></P><P>Thanks In Advance.</P><P></P><P>Stephen</P> Mon, 11 Mar 2019 14:08:00 GMT https://community.cisco.com/t5/network-security/static-nat-issue/m-p/1107740#M894041 stephen.stack 2019-03-11T14:08:00Z Re: Static Nat Issue https://community.cisco.com/t5/network-security/static-nat-issue/m-p/1107741#M894044 <HTML><HEAD></HEAD><BODY><P>Hi Stephen -</P><P></P><P>Seems like the old Xlate entry is still in the translation table.</P><P></P><P>Are you clearing the translation table after implementing the Static Nat?</P><P></P><P>thxs</P><P>peter</P></BODY></HTML> Mon, 10 Nov 2008 14:24:28 GMT https://community.cisco.com/t5/network-security/static-nat-issue/m-p/1107741#M894044 pcomeaux 2008-11-10T14:24:28Z