topic Pix515e will not accept command in Network Security https://community.cisco.com/t5/network-security/pix515e-will-not-accept-command/m-p/1079878#M894231 <P>I have a Pix515e running Version 6.1(4)when I go to add access-list it allows me to add them giving no error, but when I do a Sh configuration it doesn't show what I have added.</P><P></P><P>I added the same lines to a Pix515e running version 6.3 and it works fine.</P><P></P><P>Do I need to do a write memory before I do a show configuration so that it will display what I have added?</P><P></P> Mon, 11 Mar 2019 14:06:05 GMT bigredcherokee 2019-03-11T14:06:05Z Pix515e will not accept command https://community.cisco.com/t5/network-security/pix515e-will-not-accept-command/m-p/1079878#M894231 <P>I have a Pix515e running Version 6.1(4)when I go to add access-list it allows me to add them giving no error, but when I do a Sh configuration it doesn't show what I have added.</P><P></P><P>I added the same lines to a Pix515e running version 6.3 and it works fine.</P><P></P><P>Do I need to do a write memory before I do a show configuration so that it will display what I have added?</P><P></P> Mon, 11 Mar 2019 14:06:05 GMT https://community.cisco.com/t5/network-security/pix515e-will-not-accept-command/m-p/1079878#M894231 bigredcherokee 2019-03-11T14:06:05Z Re: Pix515e will not accept command https://community.cisco.com/t5/network-security/pix515e-will-not-accept-command/m-p/1079879#M894233 <HTML><HEAD></HEAD><BODY><P>The <B>show config</B> command is equivalent to "show startup-config", if you din't issue a write mem after acl statement configuration it will not show in startup-config but it will show in " show running-config",you need to write mem to be able to see it in show config.</P><P></P><P></P><P>Rgds</P><P>Jorge</P></BODY></HTML> Thu, 30 Oct 2008 21:47:11 GMT https://community.cisco.com/t5/network-security/pix515e-will-not-accept-command/m-p/1079879#M894233 JORGE RODRIGUEZ 2008-10-30T21:47:11Z