topic ASA Failover in Network Security https://community.cisco.com/t5/network-security/asa-failover/m-p/1080071#M894232 <P>Hi all</P><P> I have two ASAs configured in Active/standby failover in single context mode .Is it possible to configure failover such a way that when Primary unit comes up after filover, it becomes automatically active ?</P><P></P><P>Thanks in advance</P> Mon, 11 Mar 2019 14:06:07 GMT anva12345 2019-03-11T14:06:07Z ASA Failover https://community.cisco.com/t5/network-security/asa-failover/m-p/1080071#M894232 <P>Hi all</P><P> I have two ASAs configured in Active/standby failover in single context mode .Is it possible to configure failover such a way that when Primary unit comes up after filover, it becomes automatically active ?</P><P></P><P>Thanks in advance</P> Mon, 11 Mar 2019 14:06:07 GMT https://community.cisco.com/t5/network-security/asa-failover/m-p/1080071#M894232 anva12345 2019-03-11T14:06:07Z Re: ASA Failover https://community.cisco.com/t5/network-security/asa-failover/m-p/1080072#M894234 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Preempt feature in Failover on the ASA is ONLY available in Active/Active Setup and not in Active/Standby. Please review the link below:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/p.html" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/p.html</A>#</P><P>wp1840534</P><P></P><P>below is a link on Active/Active Failover:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps6120/products_configuration_example091" target="_blank">http://www.cisco.com/en/US/products/ps6120/products_configuration_example091</A></P><P>86a0080834058.shtml</P><P></P><P>Regards,</P><P>Arul</P><P></P><P>*Pls rate if it helps*</P><P></P><P></P><P></P></BODY></HTML> Thu, 30 Oct 2008 21:17:18 GMT https://community.cisco.com/t5/network-security/asa-failover/m-p/1080072#M894234 ajagadee 2008-10-30T21:17:18Z Re: ASA Failover https://community.cisco.com/t5/network-security/asa-failover/m-p/1080073#M894235 <HTML><HEAD></HEAD><BODY><P>Thanks Arul for the information and link</P></BODY></HTML> Fri, 31 Oct 2008 07:30:53 GMT https://community.cisco.com/t5/network-security/asa-failover/m-p/1080073#M894235 anva12345 2008-10-31T07:30:53Z