topic ACL to Permit Access to Port 8090 in Network Security

ACL to Permit Access to Port 8090

wilson-liao — Mon, 11 Mar 2019 14:05:38 GMT

Pix 515E 6.3(5)

I need to permit my users access to an external website that uses port 8090.

Would this be correct?

access-list permit tcp 192.168.1.0 255.255.255.0 any eq 8090

Would I also need:

Fixup protocol http 8090

Thanks.

Re: ACL to Permit Access to Port 8090

guibarati — Thu, 30 Oct 2008 17:25:17 GMT

If you put only the access-list it will work.

If you want the PIX to verify traffic of port 8090 in http layer 7 protocol you need fixup.

You must see if there is already a NAT from inside going outside and it's not using an access list with port on it. If so you need to add the same line of access list in the NAT ACL

Re: ACL to Permit Access to Port 8090

wilson-liao — Thu, 30 Oct 2008 17:43:12 GMT

Thanks quibarati. I forgot about NAT. It works now.

Re: ACL to Permit Access to Port 8090

guibarati — Thu, 30 Oct 2008 17:45:14 GMT

Rate please.