topic internet access from a pix using VPN in Network Security

internet access from a pix using VPN

dpatkins — Mon, 11 Mar 2019 13:59:00 GMT

I am trying to create a semi-secure connection where a user can VPN into the pix 515, get an address 10.10.10.10 from the VPN pool, access devices on the private side, and also be able to access devices on the outside.

Do I do this via access-list on ACL_Outside_in or is there a command that will allow me to do this?

Thanks

DWane

Re: internet access from a pix using VPN

acomiskey — Fri, 17 Oct 2008 14:50:27 GMT

Which pix version? 6, 7, 8?

Re: internet access from a pix using VPN

dpatkins — Fri, 17 Oct 2008 15:12:30 GMT

We are using pix 7.2.2

Re: internet access from a pix using VPN

acomiskey — Fri, 17 Oct 2008 15:52:39 GMT

same-security-traffic permit intra-interface

global (outside) 1 interface

nat (outside) 1 10.10.10.0 255.255.255.0

Also, make sure you are not split tunneling.

Re: internet access from a pix using VPN

dpatkins — Mon, 20 Oct 2008 12:34:43 GMT

Thank you for your help. If we are using routable addresses and not private addressing, if there an issue with these statements. We are not using NAT at this time.

Thansk

Dwane