topic Re: IPSEC ISSUE. in Network Security https://community.cisco.com/t5/network-security/ipsec-issue/m-p/1051443#M895248 <HTML><HEAD></HEAD><BODY><P>This makes no difference. You may think that you have initiated the connection; however, in this situation that is not the case.</P><P></P><P> </P></BODY></HTML> Fri, 10 Oct 2008 15:18:08 GMT andrew.prince 2008-10-10T15:18:08Z IPSEC ISSUE. https://community.cisco.com/t5/network-security/ipsec-issue/m-p/1051440#M895245 <P>Hi,</P><P></P><P>ISAKMP got stuck in reponder mode its coming up intiator mode..Is there any issue...</P><P></P><P>2 IKE Peer: 1.1.1.1</P><P> Type : L2L Role : responder </P><P> Rekey : no State : MM_ACTIVE </P><P></P><P>Regards</P><P>sateesh</P> Mon, 11 Mar 2019 13:56:02 GMT https://community.cisco.com/t5/network-security/ipsec-issue/m-p/1051440#M895245 sateeshk10 2019-03-11T13:56:02Z Re: IPSEC ISSUE. https://community.cisco.com/t5/network-security/ipsec-issue/m-p/1051441#M895246 <HTML><HEAD></HEAD><BODY><P>No issue - normal output for a VPN peer, the remote end just happend to initiate the VPN tunnel.</P><P></P><P>If you side inititate it, it would read:-</P><P></P><P>Type : L2L Role :initiator</P><P></P><P>HTH&gt;</P></BODY></HTML> Fri, 10 Oct 2008 14:59:59 GMT https://community.cisco.com/t5/network-security/ipsec-issue/m-p/1051441#M895246 andrew.prince 2008-10-10T14:59:59Z Re: IPSEC ISSUE. https://community.cisco.com/t5/network-security/ipsec-issue/m-p/1051442#M895247 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I have initiated the traffic..Still its showing responder mode only..</P><P></P><P>Regards</P><P>sateesh kumar.k</P></BODY></HTML> Fri, 10 Oct 2008 15:03:11 GMT https://community.cisco.com/t5/network-security/ipsec-issue/m-p/1051442#M895247 sateeshk10 2008-10-10T15:03:11Z Re: IPSEC ISSUE. https://community.cisco.com/t5/network-security/ipsec-issue/m-p/1051443#M895248 <HTML><HEAD></HEAD><BODY><P>This makes no difference. You may think that you have initiated the connection; however, in this situation that is not the case.</P><P></P><P> </P></BODY></HTML> Fri, 10 Oct 2008 15:18:08 GMT https://community.cisco.com/t5/network-security/ipsec-issue/m-p/1051443#M895248 andrew.prince 2008-10-10T15:18:08Z