Configuring pix 501 authentication pppoa

ciscomoon — Mon, 11 Mar 2019 13:51:40 GMT

I have linksys wireless modem/router my network currently working fine on this device. I bought Cisco pix501. i have configured the PIX.

ip address outside pppoe setroute

vpdn group Internet request dialout pppoe

vpdn group Internet localname xxxxxx@123456.net.au

vpdn group isp request dialout pppoe

vpdn group isp localname xxxxxx@123456.net.au

vpdn group isp ppp authentication mschap

vpdn username xxxxxx@123456.net.au password xxxxxx

vpdn username vpn password 123456

=========================================

The problem is encapsulation is pppoa. I dont know how to configure the pix 501 if the encapsulation pppoa. Could anyone assist me how to configure.

Thanks

Re: Configuring pix 501 authentication pppoa

Jon Marshall — Wed, 01 Oct 2008 13:03:15 GMT

The pix 501 does not have an ATM interface so it cannot do PPPOA. If you need to do PPPOA you need to look at a router instead.

Jon