topic Re: Dont see default_inspection protocol in Network Security https://community.cisco.com/t5/network-security/dont-see-default-inspection-protocol/m-p/1089021#M895652 <HTML><HEAD></HEAD><BODY><P>there should be class inspection default under global_policy</P><P></P><P>do </P><P></P><P>fw#show run | inc class inspection_default</P><P></P><P>output of above should be <B>class inspection_default</B> if no output then</P><P>create one, but again class inspection_default should be there in global policy as</P><P>all protocol inspection is under this global policy that cames as default.</P><P></P><P></P><P>fw(config)#policy-map global_policy</P><P>fw(config-pmap)#class inspection_default</P><P>fw(config-pmap-c)#inspect icmp</P><P>fw(config-pmap-c)#end</P><P>fw#wr mem </P><P></P><P></P><P>Rgds</P><P>Jorge</P></BODY></HTML> Tue, 30 Sep 2008 22:30:56 GMT JORGE RODRIGUEZ 2008-09-30T22:30:56Z Dont see default_inspection protocol https://community.cisco.com/t5/network-security/dont-see-default-inspection-protocol/m-p/1089020#M895651 <P>Hi, We have ASA 5505 installed in Production and I want to add ICMP in default_inspection but when I execute sh run command then I don't see any default_inspection rule. Please advice</P> Mon, 11 Mar 2019 13:51:29 GMT https://community.cisco.com/t5/network-security/dont-see-default-inspection-protocol/m-p/1089020#M895651 ray_stone 2019-03-11T13:51:29Z Re: Dont see default_inspection protocol https://community.cisco.com/t5/network-security/dont-see-default-inspection-protocol/m-p/1089021#M895652 <HTML><HEAD></HEAD><BODY><P>there should be class inspection default under global_policy</P><P></P><P>do </P><P></P><P>fw#show run | inc class inspection_default</P><P></P><P>output of above should be <B>class inspection_default</B> if no output then</P><P>create one, but again class inspection_default should be there in global policy as</P><P>all protocol inspection is under this global policy that cames as default.</P><P></P><P></P><P>fw(config)#policy-map global_policy</P><P>fw(config-pmap)#class inspection_default</P><P>fw(config-pmap-c)#inspect icmp</P><P>fw(config-pmap-c)#end</P><P>fw#wr mem </P><P></P><P></P><P>Rgds</P><P>Jorge</P></BODY></HTML> Tue, 30 Sep 2008 22:30:56 GMT https://community.cisco.com/t5/network-security/dont-see-default-inspection-protocol/m-p/1089021#M895652 JORGE RODRIGUEZ 2008-09-30T22:30:56Z Re: Dont see default_inspection protocol https://community.cisco.com/t5/network-security/dont-see-default-inspection-protocol/m-p/1089022#M895656 <HTML><HEAD></HEAD><BODY><P>Well I checked but not found so I added manually.</P></BODY></HTML> Tue, 30 Sep 2008 22:42:31 GMT https://community.cisco.com/t5/network-security/dont-see-default-inspection-protocol/m-p/1089022#M895656 ray_stone 2008-09-30T22:42:31Z Re: Dont see default_inspection protocol https://community.cisco.com/t5/network-security/dont-see-default-inspection-protocol/m-p/1089023#M895661 <HTML><HEAD></HEAD><BODY><P>Richard, glad is resolved, and as usual PLS contribute the good netpro cause in rating helpful posts.</P><P></P><P>Bst Rgds</P><P>Jorge</P></BODY></HTML> Wed, 01 Oct 2008 20:50:18 GMT https://community.cisco.com/t5/network-security/dont-see-default-inspection-protocol/m-p/1089023#M895661 JORGE RODRIGUEZ 2008-10-01T20:50:18Z