topic Re: Using ADSM for FWSM unable to delete the rule in Network Security https://community.cisco.com/t5/network-security/using-adsm-for-fwsm-unable-to-delete-the-rule/m-p/1083792#M895704 <HTML><HEAD></HEAD><BODY><P>You can use access rules in routed and transparent firewall mode to control IP traffic. An access rule permits or denies traffic based on the protocol, a source and destination IP address or network, and optionally the source and destination ports. </P></BODY></HTML> Mon, 06 Oct 2008 15:31:30 GMT hadbou 2008-10-06T15:31:30Z Using ADSM for FWSM unable to delete the rule https://community.cisco.com/t5/network-security/using-adsm-for-fwsm-unable-to-delete-the-rule/m-p/1083791#M895703 <P>I have a FWSM module installed in my Catalyst 6500 switch. I noticed that when i use ADSM to manage the firewall. I tried to delete the rule for FWSM but it says that the rule is not valid. I found from others it is a bug. How to solve this? Anybody knows?</P> Wed, 13 Mar 2019 00:58:16 GMT https://community.cisco.com/t5/network-security/using-adsm-for-fwsm-unable-to-delete-the-rule/m-p/1083791#M895703 leo_zidane 2019-03-13T00:58:16Z Re: Using ADSM for FWSM unable to delete the rule https://community.cisco.com/t5/network-security/using-adsm-for-fwsm-unable-to-delete-the-rule/m-p/1083792#M895704 <HTML><HEAD></HEAD><BODY><P>You can use access rules in routed and transparent firewall mode to control IP traffic. An access rule permits or denies traffic based on the protocol, a source and destination IP address or network, and optionally the source and destination ports. </P></BODY></HTML> Mon, 06 Oct 2008 15:31:30 GMT https://community.cisco.com/t5/network-security/using-adsm-for-fwsm-unable-to-delete-the-rule/m-p/1083792#M895704 hadbou 2008-10-06T15:31:30Z