topic Re: Reassembly limit exceeded in Network Security https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077773#M895725 <HTML><HEAD></HEAD><BODY><P>Please remove " inspect sqlnet " too.</P><P></P><P></P><P>Do rate if it resolves the issue.</P><P></P><P></P><P>Regards,</P><P>Sushil</P></BODY></HTML> Mon, 29 Sep 2008 14:17:10 GMT suschoud 2008-09-29T14:17:10Z Reassembly limit exceeded https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077771#M895723 <P>Hi, wonder if anyone could help with this issue... we have recently upgraded to version 8 from version 6 on PIX</P><P></P><P>When connected to Oracle servers over a VPN tunnel it bombs out with errors, looking on the PIX log (attached) showed a reassembly limit is exceeded. I've looked on the web and found a work around is to remove 'inspect rstp'</P><P></P><P>i have done this but the errors persists</P><P></P><P>It did'nt happen on version 6.3 any ideas?</P><P></P><P> </P><P></P> Mon, 11 Mar 2019 13:50:54 GMT https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077771#M895723 jmoss1 2019-03-11T13:50:54Z Re: Reassembly limit exceeded https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077772#M895724 <HTML><HEAD></HEAD><BODY><P>Please provide a running configuration of your device also.</P><P></P><P>You can try this command:</P><P></P><P>set connection embryonic-conn-max 16384 </P><P></P></BODY></HTML> Mon, 29 Sep 2008 14:14:46 GMT https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077772#M895724 jj27 2008-09-29T14:14:46Z Re: Reassembly limit exceeded https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077773#M895725 <HTML><HEAD></HEAD><BODY><P>Please remove " inspect sqlnet " too.</P><P></P><P></P><P>Do rate if it resolves the issue.</P><P></P><P></P><P>Regards,</P><P>Sushil</P></BODY></HTML> Mon, 29 Sep 2008 14:17:10 GMT https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077773#M895725 suschoud 2008-09-29T14:17:10Z Re: Reassembly limit exceeded https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077774#M895726 <HTML><HEAD></HEAD><BODY><P>Jmoss..removing Inspect wont help..you are getting reassembly limit exceeded error because tcp-proxy function/Inspection is enabled..and as TCP Proxy is mandatory for certain inspected protocols SIP, Skinny, H.323,RTSP disabling it wont help...</P><P></P><P>your problem is this CSCsl15229 </P><P></P><P>Rate if this was helpful...</P></BODY></HTML> Mon, 29 Sep 2008 15:12:53 GMT https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077774#M895726 abinjola 2008-09-29T15:12:53Z Re: Reassembly limit exceeded https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077775#M895727 <HTML><HEAD></HEAD><BODY><P>Jmoss..removing Inspect wont help..you are getting reassembly limit exceeded error because tcp-proxy function/Inspection is enabled..and as TCP Proxy is mandatory for certain inspected protocols SIP, Skinny, H.323,RTSP disabling it wont help...</P><P></P><P>your problem is this CSCsl15229 </P><P></P><P>Rate if this was helpful...</P></BODY></HTML> Mon, 29 Sep 2008 15:13:39 GMT https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077775#M895727 abinjola 2008-09-29T15:13:39Z Re: Reassembly limit exceeded https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077776#M895728 <HTML><HEAD></HEAD><BODY><P>ok great at least we are onto something. I've searched the bug toolkit and it says that the workaround is to not inspect rstp which i've tried but to no avail</P><P></P><P>we are on code 8.0(4), I only want to cure this one bug as everything else is fine. What version should we move to?</P></BODY></HTML> Mon, 29 Sep 2008 17:30:14 GMT https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077776#M895728 jmoss1 2008-09-29T17:30:14Z Re: Reassembly limit exceeded https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077777#M895729 <HTML><HEAD></HEAD><BODY><P>this was a feature enhancement request...you may go to any of these codes.. </P><P>8.0(4.1)</P><P>8.2(0.141)</P><P>8.1(101.6)</P><P>8.1(1.10</P><P></P><P>plz rate if it helps !</P></BODY></HTML> Tue, 30 Sep 2008 03:49:19 GMT https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077777#M895729 abinjola 2008-09-30T03:49:19Z Re: Reassembly limit exceeded https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077778#M895730 <HTML><HEAD></HEAD><BODY><P>Guys i've removed the inspect sqlnet and it's ok now</P><P></P><P>we will however move to a later version of code asap to fix this bug</P><P></P><P>thanks all for your help with this</P></BODY></HTML> Tue, 30 Sep 2008 07:37:39 GMT https://community.cisco.com/t5/network-security/reassembly-limit-exceeded/m-p/1077778#M895730 jmoss1 2008-09-30T07:37:39Z