topic Re: Pix 8.0.4 transparent mode in Network Security https://community.cisco.com/t5/network-security/pix-8-0-4-transparent-mode/m-p/1065657#M895805 <HTML><HEAD></HEAD><BODY><P>below link might be helpful;</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml" target="_blank">http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml</A></P><P></P><P></P><P>Regards,</P><P>Sushil</P></BODY></HTML> Fri, 26 Sep 2008 14:58:29 GMT suschoud 2008-09-26T14:58:29Z Pix 8.0.4 transparent mode https://community.cisco.com/t5/network-security/pix-8-0-4-transparent-mode/m-p/1065656#M895798 <P>I want to use a pix in transparent mode to segregate two VLANs from the rest of the network. All the VLANs are being routed at the core 6500s. How can I insert the Pix transparently for those VLANs to still retain the 6500s for routing? I'm guessing I would have to subinterface the Pix (it only has two interfaces) to accomodate both VLANs. Any ideas or recommendations? Running 8.0.4 code on a Pix 515.</P> Mon, 11 Mar 2019 13:50:06 GMT https://community.cisco.com/t5/network-security/pix-8-0-4-transparent-mode/m-p/1065656#M895798 David Niemann 2019-03-11T13:50:06Z Re: Pix 8.0.4 transparent mode https://community.cisco.com/t5/network-security/pix-8-0-4-transparent-mode/m-p/1065657#M895805 <HTML><HEAD></HEAD><BODY><P>below link might be helpful;</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml" target="_blank">http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml</A></P><P></P><P></P><P>Regards,</P><P>Sushil</P></BODY></HTML> Fri, 26 Sep 2008 14:58:29 GMT https://community.cisco.com/t5/network-security/pix-8-0-4-transparent-mode/m-p/1065657#M895805 suschoud 2008-09-26T14:58:29Z Re: Pix 8.0.4 transparent mode https://community.cisco.com/t5/network-security/pix-8-0-4-transparent-mode/m-p/1065658#M895812 <HTML><HEAD></HEAD><BODY><P>Unfortunately I'm looking for more detail than that provides.</P></BODY></HTML> Fri, 26 Sep 2008 15:10:50 GMT https://community.cisco.com/t5/network-security/pix-8-0-4-transparent-mode/m-p/1065658#M895812 David Niemann 2008-09-26T15:10:50Z