topic pager line 0 problem in Network Security https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060445#M895903 <P>i have pix 515E bundle running 6.3(5) version.it is taking "no pager" by default. when i am configuring pager line as 24, it will taking this length but after some time(5-7 mins),again the pager line goes to 0. Simaltaneously when i am trying to do "write memory" sometime it is accepting the command and sometimes not "flash is used by another task". but everything is running fine on standby pix. </P> Mon, 11 Mar 2019 13:49:31 GMT Satya Siba Sundar Mishra 2019-03-11T13:49:31Z pager line 0 problem https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060445#M895903 <P>i have pix 515E bundle running 6.3(5) version.it is taking "no pager" by default. when i am configuring pager line as 24, it will taking this length but after some time(5-7 mins),again the pager line goes to 0. Simaltaneously when i am trying to do "write memory" sometime it is accepting the command and sometimes not "flash is used by another task". but everything is running fine on standby pix. </P> Mon, 11 Mar 2019 13:49:31 GMT https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060445#M895903 Satya Siba Sundar Mishra 2019-03-11T13:49:31Z Re: pager line 0 problem https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060446#M895904 <HTML><HEAD></HEAD><BODY><P>Satya,</P><P></P><P></P><P>Looks like flash has gone bad.Time to replace the good old PIX.</P><P></P><P></P><P>Everything would run fine on standby pix as it has a different hardware.</P><P></P><P>Regards,</P><P>Sushil</P></BODY></HTML> Thu, 25 Sep 2008 19:22:45 GMT https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060446#M895904 suschoud 2008-09-25T19:22:45Z Re: pager line 0 problem https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060447#M895905 <HTML><HEAD></HEAD><BODY><P>i found one solution that by enabling ssh ver 2, we can solve the problem.can you please suggest me how can i check the currrent version of ssh in pix(6.3)</P></BODY></HTML> Thu, 25 Sep 2008 19:46:46 GMT https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060447#M895905 Satya Siba Sundar Mishra 2008-09-25T19:46:46Z Re: pager line 0 problem https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060448#M895906 <HTML><HEAD></HEAD><BODY><P>As far as I remember,pix running 6.x will not support version 2.0</P><P>It supports version 1.0 and 1.5</P><P></P><P></P><P></P><P>Reagrds,</P><P>Sushil</P></BODY></HTML> Thu, 25 Sep 2008 19:56:49 GMT https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060448#M895906 suschoud 2008-09-25T19:56:49Z Re: pager line 0 problem https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060449#M895907 <HTML><HEAD></HEAD><BODY><P>it is taking command to enable ssh ver 2, but i am not sure how to check the current version of ssh</P></BODY></HTML> Thu, 25 Sep 2008 20:07:36 GMT https://community.cisco.com/t5/network-security/pager-line-0-problem/m-p/1060449#M895907 Satya Siba Sundar Mishra 2008-09-25T20:07:36Z