topic higher security level to low security level without NAT in Network Security https://community.cisco.com/t5/network-security/higher-security-level-to-low-security-level-without-nat/m-p/1101381#M896296 <P>Hi all, is it possible that the inside interface can access servers in DMZ with using NAT?</P><P></P><P>Thanks</P> Mon, 11 Mar 2019 13:45:14 GMT ariesc_33 2019-03-11T13:45:14Z higher security level to low security level without NAT https://community.cisco.com/t5/network-security/higher-security-level-to-low-security-level-without-nat/m-p/1101381#M896296 <P>Hi all, is it possible that the inside interface can access servers in DMZ with using NAT?</P><P></P><P>Thanks</P> Mon, 11 Mar 2019 13:45:14 GMT https://community.cisco.com/t5/network-security/higher-security-level-to-low-security-level-without-nat/m-p/1101381#M896296 ariesc_33 2019-03-11T13:45:14Z Re: higher security level to low security level without NAT https://community.cisco.com/t5/network-security/higher-security-level-to-low-security-level-without-nat/m-p/1101382#M896298 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>You mean access the DMZ from inside network without nat ? </P><P></P><P></P><P>Sure you can .. </P><P></P><P>access-list no-nat permit ip <INTERNAL network=""> 255.255.255.0 <DMZ-NETWORK></DMZ-NETWORK></INTERNAL></P><P></P><P>nat (inside) 0 access-list no-nat</P><P></P><P>I hope it helps .. please rate helpful posts !!!</P><P></P></BODY></HTML> Wed, 17 Sep 2008 02:55:34 GMT https://community.cisco.com/t5/network-security/higher-security-level-to-low-security-level-without-nat/m-p/1101382#M896298 Fernando_Meza 2008-09-17T02:55:34Z