topic Re: C3650 disable tftp-server command in Network Security

C3650 disable tftp-server command

JunghunLim7806 — Fri, 21 Feb 2020 17:27:39 GMT

hello,

I want to know the command to disable tftp-server.

and I want to know information about the commands in a capture

Is this different from the no service tftp-server command?

balaji.bandi — Thu, 05 Sep 2019 07:18:41 GMT

that is load sequence, you want to disable another command is good

JunghunLim7806 — Thu, 05 Sep 2019 07:24:12 GMT

thank you,

Can you explain in detail?

Leo Laohoo — Thu, 05 Sep 2019 08:32:03 GMT

TFTP server is disabled by default.
Post the complete output to the command "sh run | i tftp".

JunghunLim7806 — Thu, 05 Sep 2019 08:40:29 GMT

nothing is output

then Is there a document to see its contents?

and Is there a command that can be enabled in reverse?

Leo Laohoo — Thu, 05 Sep 2019 09:27:22 GMT

Wait ... you're not making any sense.
Are you trying to disable the TFTP functionality of the switch or do you intend to stop TFTP in the network?

JunghunLim7806 — Thu, 05 Sep 2019 10:05:05 GMT

i trying to disable the TFTP functionality of the switch

balaji.bandi — Thu, 05 Sep 2019 10:58:31 GMT

As suggested by default tftp disabled.

If you like switch not to use any TFTP functional to get files from remote TFTP Server,

1. Do not give access to this switch from far end TFTP Server.

2. Create ACL to block TFTP files send and receive from switch.

Leo Laohoo — Thu, 05 Sep 2019 11:03:12 GMT

@JunghunLim7806 wrote:

i trying to disable the TFTP functionality of the switch

Like I said before, by default, TFTP functionality of the switch is disabled.

So if the command "sh run | i tftp" doesn't show up anything then TFTP is disabled on the switch.