https://community.cisco.com/t5/network-security/what-ise-node-does-wlc-point-to/m-p/3320369#M904809 <P>Hi,</P> <P>&nbsp;</P> <P>Thanks for your reply.SO on PSN you configure the contoller and on the contoller you configure the PSN?</P> Sun, 28 Jan 2018 09:05:47 GMT uzochikwa 2018-01-28T09:05:47Z https://community.cisco.com/t5/network-security/what-ise-node-does-wlc-point-to/m-p/3320279#M904802 <P>Hi Guys,</P> <P>&nbsp;</P> <P>WHat ISE node is configured on WLAN contollers-PAN,MNT or PSN?</P> <P>&nbsp;</P> Fri, 21 Feb 2020 15:13:04 GMT https://community.cisco.com/t5/network-security/what-ise-node-does-wlc-point-to/m-p/3320279#M904802 uzochikwa 2020-02-21T15:13:04Z https://community.cisco.com/t5/network-security/what-ise-node-does-wlc-point-to/m-p/3320286#M904806 <P>The PSN is running the RADIUS-server (or TACACS for Device-Admin). All devices that are RADIUS- or TACACS-clients point to your PSNs.</P> Sat, 27 Jan 2018 21:47:04 GMT https://community.cisco.com/t5/network-security/what-ise-node-does-wlc-point-to/m-p/3320286#M904806 Karsten Iwen 2018-01-27T21:47:04Z https://community.cisco.com/t5/network-security/what-ise-node-does-wlc-point-to/m-p/3320369#M904809 <P>Hi,</P> <P>&nbsp;</P> <P>Thanks for your reply.SO on PSN you configure the contoller and on the contoller you configure the PSN?</P> Sun, 28 Jan 2018 09:05:47 GMT https://community.cisco.com/t5/network-security/what-ise-node-does-wlc-point-to/m-p/3320369#M904809 uzochikwa 2018-01-28T09:05:47Z https://community.cisco.com/t5/network-security/what-ise-node-does-wlc-point-to/m-p/3320380#M904811 <P>All ISE&nbsp;policy-config is done on the&nbsp;PAN. But it gets synchronized to the PSN where the actual&nbsp;AAA-work is done. The controller (and for your wired deployment the switches) don't care about the PAN, they need to know which PSN to communicate with.</P> Sun, 28 Jan 2018 10:04:40 GMT https://community.cisco.com/t5/network-security/what-ise-node-does-wlc-point-to/m-p/3320380#M904811 Karsten Iwen 2018-01-28T10:04:40Z