topic Re: Cisco Prime Infrastructure 3.1 in Network Security

Cisco Prime Infrastructure 3.1

Maurice Ball — Fri, 21 Feb 2020 14:45:40 GMT

With Prime 3.1 is it possible to setup an alarm that will notify you when a wireless client disconnects from the wireless network?

Re: Cisco Prime Infrastructure 3.1

Flavio Miranda — Thu, 16 Nov 2017 14:14:29 GMT

Hi @Maurice Ball

Yes, there is.

In Monitor / Monitoring Tools / Clients and Users there´s a button "Track Clients". By clicking this button, you can enter a email address or choose alarm.

-If I helped you somehow, please, rate it as useful.-

Re: Cisco Prime Infrastructure 3.1

Maurice Ball — Thu, 16 Nov 2017 14:24:29 GMT

Yes, I understand how to configure an alarm when a client connects to the network, but I am unsure of how to configure an alarm for when a client disconnects from the network. Could you please provide instructions on how to accomplish this.

Thanks for your help,

[cid:image001.png@01D35EEE.E4E49790]

Maurice Ball
Senior Consultant
Mobil +47 952 77 372
maurice.ball@atea.no

Atea AS, Stadionparken, Jåttåvågveien 7 - Stavanger
Sentralbord: +47 22 09 50 00
www.atea.no<>

[id:image001.png@01D315A9.7258B9B0]

Møteplassen for oss som elsker IT
Fellesskap. Nettverk. Inspirasjon. Kompetanse.
Bli en del av Atea Community.<>

Re: Cisco Prime Infrastructure 3.1

Flavio Miranda — Thu, 16 Nov 2017 14:30:50 GMT

For disconnects specifically is not possible. What you can do is on "Notification Frequency" put this to "On every Detection" so that you can track ins and out. But i can´t see how to setup a specific alarm pointing that a client left the network.

-If I helped you somehow, please, rate it as useful.-