topic What's your question? in Network Security

Upgrading Cisco Nexus 9372

vrian_colaba — Fri, 21 Feb 2020 13:55:49 GMT

Upgrading Cisco Nexus 9372 with this kind of set-up. See topology below:

What's your question?

Marvin Rhoads — Tue, 04 Oct 2016 03:24:44 GMT

What's your question?

Hello Sir,

vrian_colaba — Tue, 04 Oct 2016 03:31:46 GMT

Hello Sir,

Good Day to you. My question is that what is the best procedure in upgrading the Cisco Nexus Switches set-up in HSRP, vPC? I attached the current diagram for reference.

Generally speaking there's no

Marvin Rhoads — Tue, 04 Oct 2016 12:57:37 GMT

Generally speaking there's no difference from it being a Nexus-based core vs. a Catalyst-based one.

I would normally upgrade the HSRP standby unit first to minimize things being changed at one time.

Just run the "install all nxos <image name>" command on the Nexus and watch for it to come back up successfully.

You diagram looks a bit odd. I would not expect the ASA primary and standby to both connect to Nexus interface Po1/VPC106. You also show VRF Inet only on the "B"Nexus, Is that correct?