topic Software upgrade of stack switch in Network Security

Software upgrade of stack switch

vrian_colaba — Fri, 21 Feb 2020 13:53:20 GMT

Hello All,

Good Day! Can you help me how to upgrade the switch on this stack?

MCC01.IDF02.SWG01#show version | begin SW Version

Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 52 WS-C3750G-48PS 12.2(55)SE10 C3750-IPBASEK9-M

2 54 WS-C3750X-48P 12.2(55)SE10 C3750E-IPBASEK9-M

ThankYou.

vrian

* 1 52 WS-C3750G-48PS

Leo Laohoo — Sat, 06 Aug 2016 23:51:26 GMT

* 1 52 WS-C3750G-48PS 12.2(55)SE10 C3750-IPBASEK9-M

2 54 WS-C3750X-48P 12.2(55)SE10 C3750E-IPBASEK9-M

The Release Notes will provide detailed instructions on how to upgrade a stack.

im getting an error when I

vrian_colaba — Mon, 08 Aug 2016 23:33:35 GMT

im getting an error when I upgraded it.

archive download-sw /overwrite /allow-feature-upgrade /reload tftp://10.4.2.125/c3750-ipbasek9-tar.150-2.SE10.tar

archive download-sw /overwrite /allow-feature-upgrade /reload tftp://10.4.2.125/c3750e-ipbasek9-tar.150-2.SE10.tar

MCC01.IDF02.SWG01#$ tftp://10.4.2.125/c3750e-ipbasek9-tar.150-2.SE10.tar

Loading c3750e-ipbasek9-tar.150-2.SE10.tar from 10.4.2.125 (via Vlan201): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 25753600 bytes]

Error: The image in the archive which would be used to upgrade

Error: system number 1 does not support that system type.

Loading c3750e-ipbasek9-tar

Leo Laohoo — Mon, 08 Aug 2016 23:46:28 GMT

Loading c3750e-ipbasek9-tar.150-2.SE10.tar from 10.4.2.125 (via Vlan201):

The error message makes sense. Switch stack member #1 is a "WS-C3750G-48PS" but the IOS being loaded into this model is for a 3750E/X.

The command should be: archive download-sw /destination 1 tftp://10.4.2.125/c3750-ipbasek9-tar.150-2.SE10.tar

For the 3750E/X, the command should be: archive download-sw /destination 2 tftp://10.4.2.125/c3750e-ipbasek9-tar.150-2.SE10.tar

When I use this, is there

vrian_colaba — Tue, 09 Aug 2016 00:23:00 GMT

When I use this, is there will have a problem when I reload it?

Thank you.

vrian

When I use this, is there

Leo Laohoo — Tue, 09 Aug 2016 00:52:14 GMT

When I use this, is there will have a problem when I reload it?

I don't understand the question. Please elaborate further.

If the correct command doesn't get entered this means the correct IOS doesn't get loaded.

When I use this command below

vrian_colaba — Tue, 09 Aug 2016 01:48:24 GMT

When I use this command below, is there a problem that I will encounter when I reload the switch? Is the stack setup will have an issue?

The command should be: archive download-sw /destination 1 tftp://10.4.2.125/c3750-ipbasek9-tar.150-2.SE10.tar

For the 3750E/X, the command should be: archive download-sw /destination 2 tftp://10.4.2.125/c3750e-ipbasek9-tar.150-2.SE10.tar

What will be the best

vrian_colaba — Fri, 16 Sep 2016 06:28:05 GMT

What will be the best procedure in upgrading the stack switch one at a time? Without using the archive download-sw command? Like for example, I have 6 switches in a stack.

Thank You.

vrian