topic Security conversion Tool (SCT) in Network Security

Security conversion Tool (SCT)

Amadou TOURE — Mon, 11 Mar 2019 13:39:44 GMT

Hello,

Does someone knows how to format a "ifconfig -a" output from checkpoint secureplatform and make it compatible with the format of file for routes and interfaces information that the Cisco conversion tool accepts.

The documentation says that nokia ipso and secureplatform "ifconfig -a" output are accepted but it seems that only the nokia ipso output command is recognized.

The error message that I got from the tool is :

internal error: Error...invalid format in the input file <path of the file> line = eth0

Thanks for any help

Re: Security conversion Tool (SCT)

cisco24x7 — Fri, 05 Sep 2008 18:15:04 GMT

What are you trying to achieve here? Convert

a Checkpoint Security policy to ASA security

policy using SCT?

If you have a complicate Checkpoint security

policy, you can forget about using the SCT.

It just does NOT work and give you more

headache than it worth.

(for the benefit of the new

Anand Kanani — Wed, 21 May 2014 08:35:54 GMT

(for the benefit of the new readers)

Here is the new self-service tool that Cisco has released to convert to any vendor firewalls to Cisco ASA.

Currently it supports Juniper ScreenOS and CheckPoint to Cisco ASA conversion.

Link to the original post:

https://supportforums.cisco.com/community/netpro/security/firewall/blog/2013/12/19/conversion-tool--checkpoint-fw-to-cisco-asa

Link to the tool itself:

https://fwmig.cisco.com