topic Re: asdm location command after upgrade in Network Security

asdm location command after upgrade

AndyWaldoz — Mon, 11 Mar 2019 13:39:36 GMT

Hi,

Before running firmware asa722-k8.bin and asdm-522.bin ASDM "asdm location" config lines were created when we created a network object.

After the upgrade to asa722-k8.bin and asdm-522.bin this dissapeared.

We recently upgraded to asa724-k8.bin and asdm-524.bin which brought those config lines back.

So could anyone tell me if "asdm location" is needed, if not can we make sure those lines wont pollute the config file?

grts,

AWa

Re: asdm location command after upgrade

andrew.prince — Thu, 04 Sep 2008 06:56:10 GMT

The ASDM location config does not interfere with any "critical" config in the ASA - they are merely pointers for the ASDM to place in the correct locations for network objects when you perform configuration thru the ASDM GUI.

Re: asdm location command after upgrade

g.meerkoetter — Thu, 04 Sep 2008 07:11:00 GMT

I'm pretty sure you need those asdm commands if you are using ASDM.

But I think this is a mess and it's time to clean it up. IMHO trying to hide parts of the configuration is an insane concept. It will always cause confusion (see AndyWaldoz' post) and other ill effects.

For instance I keep getting reports from LMS telling me that my FWSM's startup/running config are out of sync. This is caused by the fact that the ASDM commands are only hidden when using "show running".

Is anybody listening who may get this fixed?

Re: asdm location command after upgrade

Erick.Valle — Mon, 18 Apr 2011 13:56:04 GMT

http://www.cisco.com/en/US/docs/security/asa/asa70/command/reference/ab.html#wp1345787

asdm location

Caution Do not manually configure this command. ASDM adds asdm location commands to the running configuration and uses them for internal communication. This command is included in the documentation for informational purposes only.