topic There is a wealth of in Network Security

How to configure ASA IPS modules to be monitored by CSM?

zizaziza011 — Fri, 21 Feb 2020 13:44:14 GMT

I have CSM 4.10 for managing my Cisco security devices. What do I need to do on ASA IPS module and CSM, so ASA IPS modules will be properly monitored by CSM? (dashboard widgets, event viewer, heath monitoring and rest).

Thank you in advance!

There is a wealth of

Marvin Rhoads — Thu, 25 Feb 2016 03:28:13 GMT

There is a wealth of information provided in great detail in the User Guide.

Please refer to it here:

http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/410/user/guide/CSMUserGuide/ivman.html#pgfId-511988

Thank you Marvin. I already

zizaziza011 — Thu, 25 Feb 2016 07:49:15 GMT

Thank you Marvin. I already did all of the following from User Guide you provided. However, I still cannot see ASA IPS events and information in IPS related dashboard widgets. Is it necessary to have SNMP communication enabled for this?

The transfer from IPS Sensor

Marvin Rhoads — Sat, 27 Feb 2016 13:37:19 GMT

The transfer from IPS Sensor to CSM is via SDEE protocol.

Since CSM runs on a Windows server, you can easily do a Wireshark packet capture to confirm whether or not the transfer is taking place.

The TAC might be a good resource as looking at it interactively is probably the most effective troubleshooting method.