topic FWSM 4.0(2) and command authorization in Network Security https://community.cisco.com/t5/network-security/fwsm-4-0-2-and-command-authorization/m-p/1131197#M915114 <P>Hi, 4.0(2) FWSM version seems to have a problem with command authorization and "show runn" command. With "aaa authorization command" enabled you cannot execute "show runn", but "show conf" runs. With "aaa authorization command" disabled, "show runn" runs.</P><P>thank you in advance</P><P>greatings</P><P>RS </P> Mon, 11 Mar 2019 13:26:57 GMT r.spiandorello 2019-03-11T13:26:57Z FWSM 4.0(2) and command authorization https://community.cisco.com/t5/network-security/fwsm-4-0-2-and-command-authorization/m-p/1131197#M915114 <P>Hi, 4.0(2) FWSM version seems to have a problem with command authorization and "show runn" command. With "aaa authorization command" enabled you cannot execute "show runn", but "show conf" runs. With "aaa authorization command" disabled, "show runn" runs.</P><P>thank you in advance</P><P>greatings</P><P>RS </P> Mon, 11 Mar 2019 13:26:57 GMT https://community.cisco.com/t5/network-security/fwsm-4-0-2-and-command-authorization/m-p/1131197#M915114 r.spiandorello 2019-03-11T13:26:57Z Re: FWSM 4.0(2) and command authorization https://community.cisco.com/t5/network-security/fwsm-4-0-2-and-command-authorization/m-p/1131198#M915115 <HTML><HEAD></HEAD><BODY><P>How are you entering the 'show run' command in your ACS server?</P><P></P><P>Regrads</P><P></P><P>Farrukh</P></BODY></HTML> Wed, 06 Aug 2008 13:09:06 GMT https://community.cisco.com/t5/network-security/fwsm-4-0-2-and-command-authorization/m-p/1131198#M915115 Farrukh Haroon 2008-08-06T13:09:06Z Re: FWSM 4.0(2) and command authorization https://community.cisco.com/t5/network-security/fwsm-4-0-2-and-command-authorization/m-p/1131199#M915116 <HTML><HEAD></HEAD><BODY><P>In ACS I allowed all commands for the user group and with 4.0(1) version I had no matters.</P><P>regards</P><P>renato</P></BODY></HTML> Wed, 06 Aug 2008 13:45:55 GMT https://community.cisco.com/t5/network-security/fwsm-4-0-2-and-command-authorization/m-p/1131199#M915116 r.spiandorello 2008-08-06T13:45:55Z Re: FWSM 4.0(2) and command authorization https://community.cisco.com/t5/network-security/fwsm-4-0-2-and-command-authorization/m-p/1131200#M915117 <HTML><HEAD></HEAD><BODY><P>Did you try to run a debug?</P><P></P><P>debug tacacs</P><P>debug aaa authorization</P><P></P><P>To see what exactly is happening?</P><P></P><P>Regards</P><P></P><P>Farrukh</P></BODY></HTML> Wed, 06 Aug 2008 13:52:56 GMT https://community.cisco.com/t5/network-security/fwsm-4-0-2-and-command-authorization/m-p/1131200#M915117 Farrukh Haroon 2008-08-06T13:52:56Z