topic Re: SNMP for FWSM in Network Security https://community.cisco.com/t5/network-security/snmp-for-fwsm/m-p/1122834#M915212 <HTML><HEAD></HEAD><BODY><P>Hi Lee,</P><P></P><P>This really depends on what statistics you want to see. Security contexts will contain their own unique SNMP configurations. By configuring SNMP in the Admin context, you will only be able to poll MIBs for data that can be obtained through the Admin context. So, as an example, you will not be able to look at the CPU utilization of a context other than the Admin context, but you might see the resource usage statistics for the various contexts.</P><P></P><P>Hope that helps.</P><P></P><P>-Mike</P></BODY></HTML> Tue, 05 Aug 2008 21:34:27 GMT robertson.michael 2008-08-05T21:34:27Z SNMP for FWSM https://community.cisco.com/t5/network-security/snmp-for-fwsm/m-p/1122833#M915209 <P>Hello,</P><P></P><P>Is it possible to SNMP poll the FWSM from an Admin context to obtain stats from all other contexts? Is there anyway to do this?</P><P></P><P>Thanks,</P><P>Lee</P> Mon, 11 Mar 2019 13:26:00 GMT https://community.cisco.com/t5/network-security/snmp-for-fwsm/m-p/1122833#M915209 lxcollin1 2019-03-11T13:26:00Z Re: SNMP for FWSM https://community.cisco.com/t5/network-security/snmp-for-fwsm/m-p/1122834#M915212 <HTML><HEAD></HEAD><BODY><P>Hi Lee,</P><P></P><P>This really depends on what statistics you want to see. Security contexts will contain their own unique SNMP configurations. By configuring SNMP in the Admin context, you will only be able to poll MIBs for data that can be obtained through the Admin context. So, as an example, you will not be able to look at the CPU utilization of a context other than the Admin context, but you might see the resource usage statistics for the various contexts.</P><P></P><P>Hope that helps.</P><P></P><P>-Mike</P></BODY></HTML> Tue, 05 Aug 2008 21:34:27 GMT https://community.cisco.com/t5/network-security/snmp-for-fwsm/m-p/1122834#M915212 robertson.michael 2008-08-05T21:34:27Z