topic Re: FWSM & TRAFFIC SHAPE in Network Security https://community.cisco.com/t5/network-security/fwsm-traffic-shape/m-p/1070445#M915788 <HTML><HEAD></HEAD><BODY><P>if u wanna make rate limiting u can acomplish it through plicing </P><P></P><P>Q. How can I configure ingress rate policing for firewall policies?</P><P>A.</P><P> access-list 2 permit 192.168.0.0 0.0.255.255</P><P> class-map type inspect match-all my_http</P><P> match protocol http</P><P> match access-group 2</P><P>policy-map type inspect my_policy</P><P>class type inspect my_http</P><P>police rate 10000 burst 1500</P><P>The rate specified is taken as bps (bits/second) and the burst is specified in units of bytes.</P><P></P><P>source:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5708/ps5710/ps1018/prod_qas09186a008010a40e.html" target="_blank">http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5708/ps5710/ps1018/prod_qas09186a008010a40e.html</A></P><P></P><P>please, if helpful Rate</P></BODY></HTML> Mon, 04 Aug 2008 03:53:39 GMT Marwan ALshawi 2008-08-04T03:53:39Z FWSM & TRAFFIC SHAPE https://community.cisco.com/t5/network-security/fwsm-traffic-shape/m-p/1070443#M915786 <P>Hi All,</P><P>I have a Cisco 7600 switch with a FWSM installed on it and how I can traffic shape in FWSM?</P> Mon, 11 Mar 2019 13:21:57 GMT https://community.cisco.com/t5/network-security/fwsm-traffic-shape/m-p/1070443#M915786 ufo777 2019-03-11T13:21:57Z Re: FWSM & TRAFFIC SHAPE https://community.cisco.com/t5/network-security/fwsm-traffic-shape/m-p/1070444#M915787 <HTML><HEAD></HEAD><BODY><P>Unfortunately, this is not possible on the FWSM.</P><P></P><P>-Mike</P></BODY></HTML> Sun, 03 Aug 2008 01:57:22 GMT https://community.cisco.com/t5/network-security/fwsm-traffic-shape/m-p/1070444#M915787 robertson.michael 2008-08-03T01:57:22Z Re: FWSM & TRAFFIC SHAPE https://community.cisco.com/t5/network-security/fwsm-traffic-shape/m-p/1070445#M915788 <HTML><HEAD></HEAD><BODY><P>if u wanna make rate limiting u can acomplish it through plicing </P><P></P><P>Q. How can I configure ingress rate policing for firewall policies?</P><P>A.</P><P> access-list 2 permit 192.168.0.0 0.0.255.255</P><P> class-map type inspect match-all my_http</P><P> match protocol http</P><P> match access-group 2</P><P>policy-map type inspect my_policy</P><P>class type inspect my_http</P><P>police rate 10000 burst 1500</P><P>The rate specified is taken as bps (bits/second) and the burst is specified in units of bytes.</P><P></P><P>source:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5708/ps5710/ps1018/prod_qas09186a008010a40e.html" target="_blank">http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5708/ps5710/ps1018/prod_qas09186a008010a40e.html</A></P><P></P><P>please, if helpful Rate</P></BODY></HTML> Mon, 04 Aug 2008 03:53:39 GMT https://community.cisco.com/t5/network-security/fwsm-traffic-shape/m-p/1070445#M915788 Marwan ALshawi 2008-08-04T03:53:39Z