topic Re: ASA 5505 Startup wizard in Network Security

ASA 5505 Startup wizard

michael.m.williams — Mon, 11 Mar 2019 13:18:09 GMT

I have been trying to config my new ASA 5505 for 2 days. I decided to use statup wizard and every time I am finished and tell it to send the config a get this error.

ASDM did not get a responce from the ASA in the last 60 seconds. Please check the configuration and your connection and then try again by clicking refresh.

here is my config.

hostname ITSCR3AS01

domain-name XXXXXXXXXx

interface Ethernet0/0

switchport access vlan 200

interface Ethernet0/1

switchport access vlan 70

interface Ethernet0/2

switchport access vlan 70

interface Ethernet0/3

switchport access vlan 70

interface Ethernet0/4

switchport access vlan 70

interface Ethernet0/5

switchport access vlan 70

Interface vlan70

no shutdown

nameif inside1

security-level 100

ip address XX.XX.180.1 255.255.255.128

Interface vlan200

no shutdown

nameif outside1

security-level 0

ip address XXX.XXX.120.118 255.255.255.128

global (outside1) 101 interface

nat (inside1) 101 0.0.0.0 0.0.0.0

http XX.XXX.180.0 255.255.255.128 inside

enable password XXXXX

Please advise.

Thanks

Mike Williams

Network Systems Analyst

Tarleton State University.

Re: ASA 5505 Startup wizard

dhananjoy chowdhury — Tue, 22 Jul 2008 12:12:14 GMT

Is your PC (IP from where you are connecting via ASDM) on the same IP subnet as the inside interface (XX.XX.180.0) ?

Re: ASA 5505 Startup wizard

michael.m.williams — Tue, 22 Jul 2008 12:14:53 GMT

No. The ASA comes configures with a default of 192.168.1.1 IP so I am in the same subnet with 192.168.1.20 (static) so I can start the startup wizard.

mike

Re: ASA 5505 Startup wizard

dhananjoy chowdhury — Tue, 22 Jul 2008 12:55:19 GMT

So, when the ASA stops responding , change the IP of the PC to a suppose XX.XX.180.20 (from ASA inside IP subnet).

Then try to connect again and this time to XX.XX.180.1 (FW inside IP)

Re: ASA 5505 Startup wizard

michael.m.williams — Tue, 22 Jul 2008 12:59:14 GMT

It never write my configs to the ASA. It gives me this error window.

ASDM did not get a responce from the ASA in the last 60 seconds. Please check the configuration and your connection and then try again by clicking refresh.

Thanks

Mike

Re: ASA 5505 Startup wizard

dhananjoy chowdhury — Tue, 22 Jul 2008 13:11:36 GMT

Ok, you can verify this easily.

Add both the IP's on your PC's NIC

- 192.x.1.20

- xx.xx.180.20

Then use the wizard.

Re: ASA 5505 Startup wizard

michael.m.williams — Tue, 22 Jul 2008 14:08:06 GMT

I added both IPs to NIC card and it still will not save the configs on the ASA. Same error mesg.

mike

Re: ASA 5505 Startup wizard

michael.m.williams — Wed, 23 Jul 2008 12:52:31 GMT

I finally just did it using the CLI.

Thanks

Mike