topic Re: NIC teaming with ASA in Network Security https://community.cisco.com/t5/network-security/nic-teaming-with-asa/m-p/976970#M916629 <HTML><HEAD></HEAD><BODY><P>ASA doesn't support NIC teaming.</P><P></P></BODY></HTML> Wed, 16 Jul 2008 11:07:40 GMT a.alekseev 2008-07-16T11:07:40Z NIC teaming with ASA https://community.cisco.com/t5/network-security/nic-teaming-with-asa/m-p/976969#M916624 <P>Can ASA do NIC teaming? For example, can I take both eth0 and eth1,</P><P>each NIC is 1Gbps each, and bond them into 2Gbps pipe?</P><P></P><P>The reason I am asking is because I have a customer running Checkpoint </P><P>Secureplatform NGx R65 and that the firewall can do NIC bonding. They</P><P>have 4 physical interfaces on the firewall but the interfaces have been</P><P>combined that the "outside" is of eth0 and eth1 and the "inside"</P><P>interface is of eth2 and eth3. The firewall is mainly used as backup</P><P>so high throughput is required but customer does not want to spend money</P><P>on 10G modules. They maxed out at 1.3Gbps so all they need is NIC teaming</P><P>of two 1G modules.</P><P></P><P>Can I do that with ASA? Thank you in advance.</P><P></P><P>Peter</P> Mon, 11 Mar 2019 13:15:15 GMT https://community.cisco.com/t5/network-security/nic-teaming-with-asa/m-p/976969#M916624 newatcisco 2019-03-11T13:15:15Z Re: NIC teaming with ASA https://community.cisco.com/t5/network-security/nic-teaming-with-asa/m-p/976970#M916629 <HTML><HEAD></HEAD><BODY><P>ASA doesn't support NIC teaming.</P><P></P></BODY></HTML> Wed, 16 Jul 2008 11:07:40 GMT https://community.cisco.com/t5/network-security/nic-teaming-with-asa/m-p/976970#M916629 a.alekseev 2008-07-16T11:07:40Z