FWSM 3.1 Set TCP Idle timeout - ISSUES!

lee.reade — Mon, 11 Mar 2019 13:08:54 GMT

HI,

I need to set the tcp idle timeout for a specific tcp stream to 0, due to issues with legacy server.

I have implemented a class-map to match the access-list, which in turn matches the flow, I have then put this into the global_policy policy-map and set the connection tcp 0.

However it doesnt seem to be working, as tcp sessions for the flow are still idleing out.

Do you need to remove the policy map from the global interface and then re-apply for it to take effect???

Class-map TCP

Match access-group TCP

policy-map global_policy

class-map TCP

set connection timeout 0

class inspection_default

Any advice most welcome!

Thanks

Re: FWSM 3.1 Set TCP Idle timeout - ISSUES!

lee.reade — Thu, 03 Jul 2008 10:58:00 GMT

Well,

Turned out to be a bug,

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsg96196

Cheers,

topic FWSM 3.1 Set TCP Idle timeout - ISSUES! in Network Security

FWSM 3.1 Set TCP Idle timeout - ISSUES!

Re: FWSM 3.1 Set TCP Idle timeout - ISSUES!