topic Re: What is Required in Network Security https://community.cisco.com/t5/network-security/what-is-required/m-p/958182#M917542 <HTML><HEAD></HEAD><BODY><P>Two things are required NAT and Access-list -</P><P>- NAT commands (for all users in DMZ):</P><P>global(outside) 1 interface</P><P>nat(dmz) 1 0.0.0.0 0.0.0.0 </P><P></P><P>- Access-lists (for allowing HTTP):</P><P>access-list dmz-out extended permit tcp any eq www any</P></BODY></HTML> Sat, 28 Jun 2008 13:29:12 GMT dhananjoy chowdhury 2008-06-28T13:29:12Z What is Required https://community.cisco.com/t5/network-security/what-is-required/m-p/958181#M917541 <P>How can i allow all outbound traffice for my DMZ users through the outside interface of pix?</P><P></P><P>My DMZ users have a private IP Range 192.168.2.0 and a security level of 50. The Outside interface sec is 0.</P><P></P><P>Thanks!</P> Mon, 11 Mar 2019 13:06:27 GMT https://community.cisco.com/t5/network-security/what-is-required/m-p/958181#M917541 cscisco_admin 2019-03-11T13:06:27Z Re: What is Required https://community.cisco.com/t5/network-security/what-is-required/m-p/958182#M917542 <HTML><HEAD></HEAD><BODY><P>Two things are required NAT and Access-list -</P><P>- NAT commands (for all users in DMZ):</P><P>global(outside) 1 interface</P><P>nat(dmz) 1 0.0.0.0 0.0.0.0 </P><P></P><P>- Access-lists (for allowing HTTP):</P><P>access-list dmz-out extended permit tcp any eq www any</P></BODY></HTML> Sat, 28 Jun 2008 13:29:12 GMT https://community.cisco.com/t5/network-security/what-is-required/m-p/958182#M917542 dhananjoy chowdhury 2008-06-28T13:29:12Z