topic Re: NAT and IPSEC in Network Security https://community.cisco.com/t5/network-security/nat-and-ipsec/m-p/1015867#M917941 <HTML><HEAD></HEAD><BODY><P>Refer to the documnet present in the following url which explains configuring IPSEC using NAT:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008045a2d2.shtml" target="_blank">http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008045a2d2.shtml</A></P></BODY></HTML> Fri, 27 Jun 2008 09:43:42 GMT hadbou 2008-06-27T09:43:42Z NAT and IPSEC https://community.cisco.com/t5/network-security/nat-and-ipsec/m-p/1015866#M917938 <P>Hi guys,</P><P>Please can someone assist with the following issue. i dont know why only one machine in the 10.10.10.x range passes traffic via the tunnel while the rest does not. I have the following nat policy configured</P><P>nat (inside) 1 access-list xxx</P><P>global (outside) 1 200.200.200.1-200.200.200.30 netmask 255.255.255.0</P><P>access-list xxx permit ip 10.10.10.x 255.255.255.0 50.50.x.x 255.255.0.0</P><P>access-list crypto permit ip 200.200.200.0 255.255.255.0 host 50.50.50.5</P><P>isakmp nat-traversal 20</P><P>sysopt connection permit-vpn</P> Mon, 11 Mar 2019 13:02:50 GMT https://community.cisco.com/t5/network-security/nat-and-ipsec/m-p/1015866#M917938 madedotun 2019-03-11T13:02:50Z Re: NAT and IPSEC https://community.cisco.com/t5/network-security/nat-and-ipsec/m-p/1015867#M917941 <HTML><HEAD></HEAD><BODY><P>Refer to the documnet present in the following url which explains configuring IPSEC using NAT:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008045a2d2.shtml" target="_blank">http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008045a2d2.shtml</A></P></BODY></HTML> Fri, 27 Jun 2008 09:43:42 GMT https://community.cisco.com/t5/network-security/nat-and-ipsec/m-p/1015867#M917941 hadbou 2008-06-27T09:43:42Z