https://community.cisco.com/t5/network-security/asa-failover/m-p/945619#M918508 <P>Our primary unit failed over yesterday stating communication failure, but I want to failback. I used the failover active command, but I'm assuming that is not going to work since failover seems to be 'off'.</P><P></P><P>FW-IN01# sh failover</P><P>Failover Off</P><P>Failover unit Secondary</P><P>Failover LAN Interface: Sync Ethernet0/3 (up)</P><P>Unit Poll frequency 1 seconds, holdtime 15 seconds</P><P>Interface Poll frequency 5 seconds, holdtime 25 seconds</P><P>Interface Policy 1</P><P>Monitored Interfaces 3 of 250 maximum</P><P></P><P>FW-IN01# sh running-config failover</P><P>no failover</P><P>failover lan unit secondary</P><P>failover lan interface Sync Ethernet0/3</P><P>failover key *****</P><P>failover link Sync Ethernet0/3</P><P>failover interface ip Sync 172.16.111.1 255.255.255.0 standby 172.16.111.2</P> Mon, 11 Mar 2019 12:58:26 GMT jgorman1977 2019-03-11T12:58:26Z https://community.cisco.com/t5/network-security/asa-failover/m-p/945619#M918508 <P>Our primary unit failed over yesterday stating communication failure, but I want to failback. I used the failover active command, but I'm assuming that is not going to work since failover seems to be 'off'.</P><P></P><P>FW-IN01# sh failover</P><P>Failover Off</P><P>Failover unit Secondary</P><P>Failover LAN Interface: Sync Ethernet0/3 (up)</P><P>Unit Poll frequency 1 seconds, holdtime 15 seconds</P><P>Interface Poll frequency 5 seconds, holdtime 25 seconds</P><P>Interface Policy 1</P><P>Monitored Interfaces 3 of 250 maximum</P><P></P><P>FW-IN01# sh running-config failover</P><P>no failover</P><P>failover lan unit secondary</P><P>failover lan interface Sync Ethernet0/3</P><P>failover key *****</P><P>failover link Sync Ethernet0/3</P><P>failover interface ip Sync 172.16.111.1 255.255.255.0 standby 172.16.111.2</P> Mon, 11 Mar 2019 12:58:26 GMT https://community.cisco.com/t5/network-security/asa-failover/m-p/945619#M918508 jgorman1977 2019-03-11T12:58:26Z https://community.cisco.com/t5/network-security/asa-failover/m-p/945620#M918509 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>Try with this command:</P><P>failover</P><P></P><P></P><P>I hope this helps.</P><P>Best regards.</P><P>Massimiliano.</P></BODY></HTML> Thu, 12 Jun 2008 12:58:09 GMT https://community.cisco.com/t5/network-security/asa-failover/m-p/945620#M918509 massimiliano.serafino 2008-06-12T12:58:09Z