topic Upgrade problem in Network Security

Upgrade problem

acristofari — Mon, 11 Mar 2019 12:56:41 GMT

Hi,

I have a question about cisco asa upgrade.

I try to upgrade version 8.0.2 to 8.0.3 via rommon. The upgrade have success. When i reload the cisco asa i see the version 8.0.3 but into the flash i don't see the file. Could you help me?

Re: Upgrade problem

Alan Huseyin Kayahan — Mon, 09 Jun 2008 08:27:08 GMT

Hi alessandro,

Image installation or upgrade in rommon mode extracts the image to RAM and starts your startup config with the image for you to see if there are any inconsistencies. You should manually copy the new image to flash either in rommon or in priv mode after the extraction...

copy tftp://tftpserverip/8.0.3image.bin flash:image

Regards

Re: Upgrade problem

taungpawtar75 — Fri, 13 Jun 2008 16:56:01 GMT

Hi Sir

I have a question related to IOS for ASA. I have two IOS ver on ASA 7.2 and 8.03. Currently it use 7.2. If I tell ASA to use 8.03 which already in ASA, will it ask to reload ASA?

Thanks

Noom

Re: Upgrade problem

Farrukh Haroon — Fri, 13 Jun 2008 18:51:05 GMT

Yes it will have to reload.

Regards

Farrukh