topic Unagle to generate ssh key on WS-C4507R+E in Network Security

Unagle to generate ssh key on WS-C4507R+E

emmacisco — Fri, 21 Feb 2020 13:27:12 GMT

Hi Everyone.

I want to generate a ssh key on Catalyst WS-C4507R+E but the commande "crypto key...." does not work.

Is anything required for that?

What ios is on the 4507?It

Charles Hill — Thu, 16 Apr 2015 13:54:02 GMT

What ios is on the 4507?

It should have a k9 within the ios name.

Hope this helps.

If so, please rate.

Thanks.

Cehill.Below is the IOS:Cisco

emmacisco — Thu, 16 Apr 2015 14:02:37 GMT

Cehill.

Below is the IOS:

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.03.02.SG RELEASE SOFTWARE (fc1)

Hey emmacisco,your ios should

Charles Hill — Thu, 16 Apr 2015 14:42:15 GMT

Hey emmacisco,

your ios should be cat4500e-UNIVERSALK9-M in order to support ssh.

(K9 represents the crypto image)

IOS needs to be upgraded before it will support ssh.

Hope this helps....

Here is a posting that is troubleshooting a similar issue.

https://supportforums.cisco.com/discussion/11918386/ssh-not-support-cat4500e-universalk9spa030401sg151-2sg1bin

Hi Charles.Thanks for this

emmacisco — Fri, 17 Apr 2015 15:10:12 GMT

Hi Charles.

Thanks for this details.

In this case, do I need to get a k9 licence or there is a way to upgrade?

You will need to download and

Charles Hill — Fri, 17 Apr 2015 16:19:55 GMT

You will need to download and install the new ios onto your switch.

You will need a CCO account and a valid service contract with rights.

If not, you will need to contact your vendor or cisco rep for the upgrade.

To verify if your switch is under warranty, go to

->Tools & Resources

-> Device Checker

-> Enter your serial number

This will verify if its covered or not.

You can always call Cisco direct

Contact us

Customers and Partners: 1-800-553-6387
Technical Support: 1-800-553-2447 or 1-408-526-7209

Hope this helps.

You will need a CCO account

Charles Hill — Fri, 17 Apr 2015 17:40:49 GMT

I have attempted to post this

Charles Hill — Fri, 17 Apr 2015 17:41:11 GMT

You'll need a CCO account

Charles Hill — Fri, 17 Apr 2015 17:42:48 GMT

.Sorry for the duplicate posting. PC trouble. 🙂