topic Re: Signature update in Network Security https://community.cisco.com/t5/network-security/signature-update/m-p/611820#M91933 <HTML><HEAD></HEAD><BODY><P>The update to 5.1(2) is not a signature update, it is a service pack. The latest service pack is 5.1(3), so you probably want that. Apparently, you can't even download the 5.1(2) service pack anymore. </P></BODY></HTML> Mon, 06 Nov 2006 19:36:27 GMT mhellman 2006-11-06T19:36:27Z Signature update https://community.cisco.com/t5/network-security/signature-update/m-p/611819#M91932 <P>I have an IDS 4215 and my current version is 5.1(1)S252. What signature do I need to get to 5.1(2) ? </P> Sun, 10 Mar 2019 10:18:47 GMT https://community.cisco.com/t5/network-security/signature-update/m-p/611819#M91932 siscisco05 2019-03-10T10:18:47Z Re: Signature update https://community.cisco.com/t5/network-security/signature-update/m-p/611820#M91933 <HTML><HEAD></HEAD><BODY><P>The update to 5.1(2) is not a signature update, it is a service pack. The latest service pack is 5.1(3), so you probably want that. Apparently, you can't even download the 5.1(2) service pack anymore. </P></BODY></HTML> Mon, 06 Nov 2006 19:36:27 GMT https://community.cisco.com/t5/network-security/signature-update/m-p/611820#M91933 mhellman 2006-11-06T19:36:27Z Re: Signature update https://community.cisco.com/t5/network-security/signature-update/m-p/611821#M91934 <HTML><HEAD></HEAD><BODY><P>Right, 5.1(2) was pulled only after a few days of being available. There was a major bug that affected some sensors during the upgrade, causing them not to boot back up. 5.1(3) is just the fixed version of 5.1(2). Since some sensors did upgrade to 5.1(2) without problems and are running stable, they're using that as the minimum requirement for further signature updates.</P><P></P></BODY></HTML> Mon, 06 Nov 2006 21:26:27 GMT https://community.cisco.com/t5/network-security/signature-update/m-p/611821#M91934 RichardSW 2006-11-06T21:26:27Z