MAB Config Issue

Imran Ahmad — Fri, 21 Feb 2020 12:45:58 GMT

with acs 4.2 installed in my network, PEAP, EAP-TLS, md5... authentications work normally. But Mac-Based-Authentication doesnt work at all. i tested every thing but no luck .

This is what i have setup on Swith for MAB:

aaa new-model

aaa authentication login default none

aaa authentication dot1x default group radius

radius-server host 192.168.2.16 auth-port 1645 acct-port 1646 key cisco

dot1x system-auth-control

interface FastEthernet0/1

switchport mode access

dot1x pae authenticator

dot1x port-control auto

dot1x mac-auth-bypass

On ACS server, i created Netword-Profile for MAB, i added those Agentless hosts mac-adds, Even i created User-Name&password by those Agentless hosts mac-adds on acs, ..... still nothing seems to be working. i have selected ACS_Internal-Database for mac authentication.

On ACS while i check the Failed-attempt log, nothing is logged there. i dont know where is the issue.

Please tell me where im wrong on my config?

Re: MAB Config Issue

jw.sl9 — Thu, 06 Dec 2012 02:43:13 GMT

Under your interface type: mab

Sent from Cisco Technical Support iPad App

topic MAB Config Issue in Network Security

MAB Config Issue

Re: MAB Config Issue