CSM Question(s)

sdawson35 — Fri, 21 Feb 2020 12:27:32 GMT

Hi,

We are currently evaluating CSM 4.1 and have got stuck on a couple of things.

We have manually added 4 test firewalls (2 x ASA5510's, 1 x 5520 & PIX515E) via Configuration Manager , the pull in fine and I can see the rules and details about the firewalls but

1. We cannot see anything in the Event Viewer

2. We cannot see anything in the Report Manager

I have made sure that the firewalls can see the CSM Server via HTTPS & snmp, has anyone got any pointers on what we are doing wrong ?

Regards

Scott.

CSM Question(s)

mirober2 — Sat, 17 Sep 2011 13:17:28 GMT

Hi Scott,

Have you configured the firewalls to send their syslogs to the CSM server's Event Viewer? You'll need (at a minimum) the following configuration on the firewall:

logging enable

logging trap

logging host

-Mike

topic CSM Question(s) in Network Security

CSM Question(s)

CSM Question(s)