Ciscoworks Firewall Module Support

jjiles — Fri, 21 Feb 2020 12:19:01 GMT

We are using Firewall Modules in our Cat6500(s) (WS-SVC-FWM with FWSM 4.0(4)) to provide centralized firewall services to our users. I have been asked if there is any support for these blades in Ciscoworks. I don’t think these types of blade services have been integrated into Ciscoworks yet. We have the same issue with our wireless blades (WiSM)

I’m mostly interested on the ability to backup context configurations from the Firewall blades.

LMS 3.2 with RME 4.3.1 among others.

Thanks for any information.

Jorge A Jiles

Ciscoworks Firewall Module Support

stfuchs — Mon, 27 Jun 2011 20:20:27 GMT

The answer is yes, RME 4.3.1 support configuration management with the WS-SVC-FWM

Please refer to this link for a complete list of supported devices and modules.

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html

However, there is a enhancement bug opened as well that I think you will be interested in based on

the ability to backup context configurations from the Firewall blades.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl65838

CSCsl65838 Bug Details

Multicontext Firewalls should have ALL contexts archived from admin

Symptom:

For firewalls that support multiple contexts, RME does not archive all the context configs if just the admin context IP is in the seedfile.

Conditions:

Firewalls that support multiple contexts.

Workaround:

Manage each context configuration as an individual, separate device in RME.

Further Problem Description:

This capability should be added to RME so that the customer is not required to have IP reachability to each context and individually put that context into RME.

All the contexts can be accessed from the Admin context by changeto context system. Then either fetch the configs from the file system (dir) or changeto each context and get its config.

topic Ciscoworks Firewall Module Support in Network Security

Ciscoworks Firewall Module Support

Ciscoworks Firewall Module Support

CSCsl65838 Bug Details