topic CANNOT ACCESS CSM SERVER FROM CLIENT in Network Security

CANNOT ACCESS CSM SERVER FROM CLIENT

ericohermoso — Fri, 21 Feb 2020 12:04:23 GMT

Hello,

I am accessing the Cisco Security Manager(Installed in Windows 2003 server) from a client (Windows XP) but I cannot access.

I can ping the CSM server.

I used http and https to access based on the userguide and installation guide.

example from a client machine windows XP i used:

http://1.1.1.1:1741 or https://1.1.1.1:443

What maybe the cause of this issue?

thank you

Re: CANNOT ACCESS CSM SERVER FROM CLIENT

mirober2 — Tue, 07 Sep 2010 13:24:00 GMT

Hello,

It's possible that one or more of the CSM services has failed. Try logging into the CSM Server and opening the Services manager (Start > Run > services.msc). All of the services starting with "Cisco Security Manager..." should have a status of "Started" if everything is working correctly. (Note: do not change the "Startup Type" values for these services).

If any of the services do not have a status of "Started", you could reboot the server or restart the "Cisco Security Manager Daemon Manager" service to see if the services are able to recover.

Hope that helps.

-Mike

Re: CANNOT ACCESS CSM SERVER FROM CLIENT

Stefano De Crescenzo — Thu, 11 Nov 2010 00:02:26 GMT

Hello Erico,

did you find a solution to this issue?

Stefano