https://community.cisco.com/t5/network-security/firepower-2130-cli-accees-for-firewall-configuration/m-p/3368767#M924048 <P>FTD is configured via the GUI - either the remote Firepower Management Center (FMC) or local Firepower Device Manager (FDM). There is no option to configure ACLs and NAT via the cli.</P> <P>&nbsp;</P> <P>There is a REST API that can be used; but that's more for scripted operations vs. manual configuration.</P> Thu, 19 Apr 2018 07:25:12 GMT Marvin Rhoads 2018-04-19T07:25:12Z https://community.cisco.com/t5/network-security/firepower-2130-cli-accees-for-firewall-configuration/m-p/3368725#M924047 <P>Dear All,&nbsp;</P> <P>&nbsp;</P> <P>I am thinking to go with FirePOWER 2130 with 10g interfaces. It will have FXOS and ftd image I suppose.&nbsp;</P> <P>&nbsp;</P> <P>I want to know if I can manage ACL and NAT using CLI as use to do earlier or it is all through GUI.</P> <P>&nbsp;</P> <P>Thanks&nbsp;</P> <P>Deepak Khemani&nbsp;</P> Fri, 21 Feb 2020 15:39:05 GMT https://community.cisco.com/t5/network-security/firepower-2130-cli-accees-for-firewall-configuration/m-p/3368725#M924047 Deepak.Khemani 2020-02-21T15:39:05Z https://community.cisco.com/t5/network-security/firepower-2130-cli-accees-for-firewall-configuration/m-p/3368767#M924048 <P>FTD is configured via the GUI - either the remote Firepower Management Center (FMC) or local Firepower Device Manager (FDM). There is no option to configure ACLs and NAT via the cli.</P> <P>&nbsp;</P> <P>There is a REST API that can be used; but that's more for scripted operations vs. manual configuration.</P> Thu, 19 Apr 2018 07:25:12 GMT https://community.cisco.com/t5/network-security/firepower-2130-cli-accees-for-firewall-configuration/m-p/3368767#M924048 Marvin Rhoads 2018-04-19T07:25:12Z