topic FMCv configuration deployments to FTD failure in Network Security

FMCv configuration deployments to FTD failure

b2b0000011 — Fri, 21 Feb 2020 15:38:03 GMT

Hi,

We installed a Virtual FMC and added an ASA-5508-X FTD. This worked fine.

But the problem is that when deploying any new setting to the FTD, the deployment fails with error "failed to read the module pack files" and "Deployment failed due to failure in generating configuration for the device"

TAC says to update the FTD to 6.2.3 but this did'n help. Before re-imaging it i'd like to ask if anyone has some more idea ?

Re: FMCv configuration deployments to FTD failure

Mohammed al Baqari — Sat, 14 Apr 2018 12:56:52 GMT

-##Go to expert mode on FTD and run pigtail deploy. Then push deployment
and share the logs in txt file

Re: FMCv configuration deployments to FTD failure

b2b0000011 — Sat, 14 Apr 2018 14:33:05 GMT

Thanks Mohammed,

I posted 2 files, one pigtail only and one pigtail deplay command.

Let me know if you see something.

cheers.

caly

Re: FMCv configuration deployments to FTD failure

b2b0000011 — Sun, 22 Apr 2018 11:11:05 GMT

I've contacted the TAC. They suggested re-imaging the FTD and tthe FMC.

Ii was actually a DB corruption in the FMC.